ok...someone told me a while ago that they had intellifed an e-spyder. I didnt think this was possible, but now that i think about it it just may be? Does anyone know how/ seen this been done before?
-
Congratulations! You've just been bunkered. Compliments to your local Spyder-Man. -
Well, really all that is needed is to wire a cable to the microswitch on an E-spyder so it activates the firing mechanism and also the hopper, the same way an intelliframe does on a mag. Check out the resources here on how to Intellifeed and remember you're using the spyder's switch and you should be all set. If you're intellifeeding a mechanical spyder, you're wasting your time... totally pointless.Feedback: http://www.automags.org/forums/showt...hreadid=105565
Feedback on EBAY under QUINCYMASSGUY
Good traders: paintcatcher, a few others -
Are you intelifeeding a warp or a Hopper if so which hopper?
How to Fly: Throw yourself at the ground and miss. "Hichikers guide to the Galaxy"Comment
-
its a 12v revvy...i have an idea on how to work it, but it would only rotate the hopper when the trigger is activated, not the 1/2 or full turn that i want it to, so thats what im going to have to figure out.Congratulations! You've just been bunkered. Compliments to your local Spyder-Man.Comment
-
If you want it to spin for a certain ammout of time then you will need to make a new board for the revy. You can use a 555 timer and activate it with the pulse for the solenoid.
I think i have a diagram of what you need somewhere, i will try to post it up later.Comment
-
I was actually going to inteli my warp to my spyder before i got my e-mag. it is possible, similar to intellifeeding any mag. i tested and everything and just needed to soder everything on. Hmm, I might just do it now and show you pics.play for the game
"when i go, i want to go peacefully asleep like grandpa, not screaming like the passengers in his car." - Deep thoughts
What would you do without people like me to make life hell?Comment
Comment