well i need to know all parts that go in an autococker so list them plz
-
He comes out with a knife you come out with a gun
he sends one of yours to the hospital you send one of his to the morgue
PB-GUNS.COM FEEDBACK
AO FEEDBACK
Pbnation Feedback
-
there's a site that has all this, but:
Main body
Trigger
Timing Rod, Pump Arm, Cocking rod
front block
front block screw
Asa, with the o-ring and screw
back block
Ram
3-way
Lpr.
Bolt
bolt pin
Feedneck
ivg
hammer
hammer spring
valve
valve pin
valve spring
3-way hose
All the allen wrenches known to man,
and all those other screws
Hope this helps.E-mail:[email protected]
e-bladed sto
good traders: procircuitmxfh, brtncstm160, apowers365, barchetta, njpaint. -
thanks that helps alot i have all the allan wrenches now i just got to get the parts and btw what is ivg? but thanks for the helpHe comes out with a knife you come out with a gun he sends one of yours to the hospital you send one of his to the morgue
PB-GUNS.COM FEEDBACK
AO FEEDBACK
Pbnation Feedback
Comment
-
ivg is the velocity adjuster.
- Pump Mag - 05 Speed - Freeflow Lotus -
Feedback:
http://www.automags.org/forums/showthread.php?t=122941
Comment
-
Yeah, velocity adjuster, also the valve screw which you'll need a valve tool for.E-mail:[email protected]
e-bladed sto
good traders: procircuitmxfh, brtncstm160, apowers365, barchetta, njpaint.Comment
-
well thank you for your helpHe comes out with a knife you come out with a gun he sends one of yours to the hospital you send one of his to the morgue
PB-GUNS.COM FEEDBACK
AO FEEDBACK
Pbnation Feedback
Comment
-
3way connector - connects 3way to trigger rod and adjusts timing
valve nut - the one under the body
valve jam nut - the one behind the valve
valve tool - used to install the valve nut behind the valve
<--- WORLDS FASTEST MARKER!
Watch me OUTSHOOT a Victory Board HALO
No Patent Infringements needed :shooting:
Comment
-
ok now all i have to do is get all the partsHe comes out with a knife you come out with a gun he sends one of yours to the hospital you send one of his to the morgue
PB-GUNS.COM FEEDBACK
AO FEEDBACK
Pbnation Feedback
Comment
-
your better off going on ebay to get an old cocker cause this will run you quite a bit, if your going e -cocker go for a raceframe or a eblade
mech cocker palmerize it.
Comment
-
here's a nice diagram of all the parts and thier names.
~E~Comment
-
thats a good websiteHe comes out with a knife you come out with a gun he sends one of yours to the hospital you send one of his to the morgue
PB-GUNS.COM FEEDBACK
AO FEEDBACK
Pbnation Feedback
Comment
-
but i just went to www.worr.com and found a good diagramHe comes out with a knife you come out with a gun he sends one of yours to the hospital you send one of his to the morgue
PB-GUNS.COM FEEDBACK
AO FEEDBACK
Pbnation Feedback
Comment
Comment