Need Help W/ Cocker

[arsonpaintball06]

i recently got a race frame for my gun .......it is an older version and it is missing a connector. I also need to get the eye installed. Also the gun itself is having problems too. I am looking for sum1 from AO who can deal w/ cockers that i can send my gun to and get everything installed and fixed up

either PM, IM, or email me please

email: [email protected]

Thank you,
Jim

[Ice-Child]

Question, is the raceframe a leaf or dome switch ? If it is a dome, is it first gen, or second gen ? First gen cant use an eye, it isnt set up for it, but can be upgraded directly from Race for $150 to a leaf setup with eye ready board. Eyes are like $90 installed, with covers and drilling and the eyes themselves. If you are just looking to get it set up, I am a Race Tech, and can help you with allot of it right through the forum boards. Also check out the Racegun forums. You can find allot of help there. Racegun.dk . Sign up and join the racegun family that hangs out there. Do you happen to know what serial number is on your gripframe ?

If you have any questions, get ahold of me. Will do my best to help you through it. If you go to the downloads page at Racegun.dk, you can find an install hguide, and freekick adjust guide there. They will help with about 90% of the install problems people run into. Just follow those two guides, and you should have no problems. If you still have problems after doing those two things, get ahold of me, you can either send you marker to me, or to Racegun USA and get it running correctly. Depending on what the problem is depends on if it will cost anything, and that cost incurred.

Rob