Mockup of my Timmy project

[Timmee]

I'm putting together a Timmy, and I'm going to (hopefully) be putting some parts on it that nobody else seems to have. Namely, and Angel LCD frame and Micro-Rock. I know I'm going to have to have some parts made, but that will be further in the future (Micro-Rock adapter to fit in the ASA, and an adapter plate for the trigger frame, which will have channels in it for the LP hose and eye wires). The pic below is just a mock-up to show what it will hopefully look like.

[eddie885221]

nice, looks a little off simply cuz of the short angel frame but i bet it will balance well, IMO u need a space frame cuz that would look cool

[vf-xx]

Nice mockup. Goodluck on the project.

Space frame may feel better but that 45 fits in quite nicely with the body milling.

[Timmee]

I've actually considered picking up a space frame for this project, thinking I might not have enough room for everything I need to fit in the 45 frame (board, battery, and solenoid). If I use something like the Predator II board though, I think I can squeeze everything in.

[nato]

Thats really nice looking... with all that extra room in the back of the frame you could add a snatch or something.

N.A.T.O.

[Timmee]

Thats really nice looking... with all that extra room in the back of the frame you could add a snatch or something.

N.A.T.O.

I'm going to end up needing a rail between the body and frame, in order to allow for the air hoses and eye wires to pass to/from the ram sleeve, so that might be something I can do.

[Ballin with a MAG]

its looking real nice man

[Timmee]

Alright, I've decided to use the AKA SCM2 for the Timmy (I didn't know it existed before), to make a cleaner installation (no external hose going to the vert ASA block).