so i've had this timmy for little more then 3 mouths, and i that time i've gone through 2 noids. the timmy has a W.A.S board in it and a guy at action village(PBgear) said i may be the WAS harness or something to do with that. i'm lossing my mind cause my friend's who have timmy's have never had any prolbem(s) like this what so ever. and i was wondering if anybody had any idea oif what i should do to it. send it to get looked at or get a new board and pray for the best? if you guys could give me some help has would be super great.
-
-
You may be overpresurizing the noid, check your lpr pressure with a gauge. It shoudnt go beyond 100 or so PSI. -
thats what i heard but it haven't gottn' the new noid till acouple of days ago so i'll try in a day or so when i get air.Comment
-
i'm the person working on warthogs marker,
the first noid was the high pressure thing, it was at 90, and i think it spiked and just blew it. then he was telling me he was dry firing and it blew again. i knew the pressure wasn't high cause i had it the day before and i set it up so it was at 70 psi and the input was 300. i don't know wt(heck) is up with this. i heard something about WAS boards with equalink will sometimes fry the noid. is this true?e-mag 226
flashed with 1.31Comment
-
The only way you would "Fry" a noid is if it gets constant power to the coil, but this would be ovious since an energized coil causes the bolt to stay forward.
If it is actually fried as you say it wont click if you apply power to the coil directly.Comment
-
Your lpr might be spiking causing this to heppen, buy a lpr repair kit from www.paintballkingdom.com
www.TeamNever.comComment
Comment