First, the pictures suck. Also, this thing will be repainted. I tried to paint it today in 38 degree weather and it sucks. So as soon as a nice day comes along the orange peel issue will be taken care of.
Me and matt are going to play in a 2 man tippmann only game in november, it's no RT or ebolts allowed. I was kind of mad that it has been raining my whole fall break away so I broke out the dremel and this is what happened.
I cut the feed elbow away and fitted a warp breech with JB weld and also used one of the existing 8-32 screws. It retains the swing away properties of the tippmann breach.
I intellifed it with a subminiature pushbutton switch sandwiched between the halves where the RT ram would go. Very little work, and totally hidden.. The two screws in the trigger are the stop screw and the switch activating screw. The little red panic button is an identical switch alse wired up as a remote prime button; I like to be able to prime my warp on the field without fireing. The intellifeed wire goes out through the wire passage tippmann conveniently left for the ebolt kit.
The top cocking and low pressure mods had been done a long time ago. Notice I am running CO2. If anyone asks what the little red button is for, I'm gonna tell them it toggles invisibility mode off and on
Me and matt are going to play in a 2 man tippmann only game in november, it's no RT or ebolts allowed. I was kind of mad that it has been raining my whole fall break away so I broke out the dremel and this is what happened.
I cut the feed elbow away and fitted a warp breech with JB weld and also used one of the existing 8-32 screws. It retains the swing away properties of the tippmann breach.
I intellifed it with a subminiature pushbutton switch sandwiched between the halves where the RT ram would go. Very little work, and totally hidden.. The two screws in the trigger are the stop screw and the switch activating screw. The little red panic button is an identical switch alse wired up as a remote prime button; I like to be able to prime my warp on the field without fireing. The intellifeed wire goes out through the wire passage tippmann conveniently left for the ebolt kit.
The top cocking and low pressure mods had been done a long time ago. Notice I am running CO2. If anyone asks what the little red button is for, I'm gonna tell them it toggles invisibility mode off and on
ive never seen a top cocking tippy. that is awesome work. keep it up!
Comment