the timmy-mag

[bballe336]

ok so my current project is making a mag with timmy frame. i know that i will most likely have to drill the rail a bit and the sear tripper noid i am getting fro ma spyder frame and i will need to mount custom in the frame but i have some questions. is there anything else i will need to do? and is the timmy board capable of powering the sear tripper noid? i figure it is becuase spyders use 9.6 volts and timmys use 9 volts so you know. but anyways any suggestions on my epic project?

thanks,
Elijah

[personman]

Well, I dont know if you are going to be able to use the timmy board because the timmy and spyder boards activate different types of noids. I would say try getting a spyder board.
And a ULT will help you out alot with the solenoid.
Good luck

[Joni]

I seriously doubt that a timmy board can handle a spyder noid. It draws a lot more current than the timmy noid. Your best alternative is a t-board or morlock I think. Using a spyder frame will save you a lot of work.

[bballe336]

i think a timmy board can handle it. those noids run on 8 volts and the spyder ones run on about the same. maybe i will just use a pred board.

[Joni]

It's not about the voltage, it's a question about current. The spyder noid uses a lot more, it could very well fry the board.

[bballe336]

alright i see what you are saying but i will not put a spyder board in this gun not even a tboard. i will just go with a pred2 i know it can handle it i have one running on a spider noid right now actually.

[Joni]

as I said a morlock is fine =) (basically the same board as the pred, just smaller and no ramping). I'm using a morlock for my electro-mag project

[bballe336]

well the new pred has so many features. various modes of ramping x code so much oter useless **** lol. anyways its a great board.

[chaos lichen]

You could use the timi board to activate the stock 'noid and the use a ram to trip the sear, like tranes are bad did.

[Shadow52]

Mod Go T-board

HEY MAN
my spyder-mag mod rocks i have the xsf board rated36bps and u can add eyes
I can mod your spyder grip to work and be faster , and possible do it in your timmy grip
email me or call me 205-602-0368 Mine rips. since feb of 04

[jamescell]

You could use the timi board to activate the stock 'noid and the use a ram to trip the sear, like tranes are bad did.

my thought exactly.