Stripping Nickle Plating off of AGD Parts???

[Magaman]

[argnot]

you have to use an abrasive like sand paper or sand blasting(preferred method). then you can polish the part or leave what ever texture you have on the piece.

[Magaman]

Ok... Thanks Bud...

[syko2102]

bead blaster would work really well too, I cant say for sure where you might find one though

[Bossman]

I dont know if the cost of this material is worth the end result but...

http://www.caswellplating.com/kits/metalx.html

Or....
*******WARNING!!!!*******

Try this at your own risk!
*******WARNING!!!!*******
Always add acid to water, not the other way around
To 1 part DISTILLED WATER.
Add 2 parts of BATTERY ACID. Allow to cool.
Add 1 more part of BATTERY ACID.
Add 2oz Glycerin Per Gallon of solution (Prevents etching)
Works best warmed to 110 deg F
Must be kept in a PLASTIC container, no metal.

For the love of God...wear rubber gloves, and eye protection. Keep baking soda handy to neutralize acid

Battery acid: NAPA store
Glycerin: Drug store, skin care section.

Use wisely. hope this helps.

[noahyay]

i drilled several holes and welded my y frame, i dont think its a plating i think its all like that