Out there designing.

[Maggot6]

The quote comes to mind "anything is possible"... And it gave me this idea.
Draw a marker body, and come up with a completely new design (or one that I havn't heard of) and see if I can make it practicle enough to make it work. Before I post my sorta, well, out there idea, and embarress myself; I was wondering if any of you guys did have done the same thing? Just thought of an idea and went with it until it made (almost) logical sense?

[CKY_Alliance]

I never have but im interested to hear your idea..and why worry about embarresing yourself?specially over the enernet. thats besides the point.
lets hear your new idea!

[ICP]

It's not like there haven't been embarising things about just about everyone on the net..

So ya. spit it out. Lets see what you've come up with

[Maggot6]

Zee marker

Alright, time to dig up what I drew on paint..And if this is quite a chaotic design, remember I drew a body on MSN's whiteboard, and my friend said "How will you fit in everything"...So 2 minutes later this was born.

Time for the Lengthly explanation.

First, you click the trigger once and all of the gas goes through every part of the gun. The second and thereafter click does the following. The extra super duper powerful solenoid somehow has enough power to operate 2 things at once. Whenever you click the trigger,(2nd --- Time) It pulls both the 2nd block, 3rd block, and 4th block backwards at the same time. (This is the time when the ball falls into breach) Whenever this happens, the second block has 2 things attatched to it's left side. The longer (top) one, will push the "grey thing" backwards, and shut off all air going to the rest of the "blocks". This means at this time, the 4th block goes inside of the 3rd block, and the 3rd block is almost resting against the second one, and so forth.Then the lower second block "black thing" hits the bottom part of the air chambers. So then the air travels through the marker, just as the first time. But this time, it has to push everything forward. So the 3rd block, moves the ball in breach forward, and then once it has hit a certain point the fourth block, hits the ball with all the air needing to be released. Thus being, sorta "anti-chop". Then to cock the marker again, sense the air has completely depleted itself from the 2nd,3rd and fourht block the noid does the work. Remember, this noid is a super duper powerful one ... Oh, if you were wondering how the hell the trigger worked, it has a breakbeam type thing. It cuts the connection, and thenthe signal is sent...And the top cocking thing, is there in case something does not return quite as expected, or you just need to manually return things to the backwards position.

So, is that complicated, and quickly thought out as possible?

http://img196.exs.cx/my.php?loc=img196&image=protoproto0ey.png

Hope that picture works now...

[CKY_Alliance]

errrrr wha? you lost me to complex for me.

[tippyjack]

Wow that is really complex and you confused me big time. I have done the same as you but the desgin turned into something between a mag, shocker and something else... But good work, you might want to cad it so it is easier to understand.

[master_alexander]

i understand, and it is a great idea, just need s some tweaking.

i had to read it 2 times though.

i'll pm you

[Maggot6]

I don't truely know how timmies and angels etc work, but on the plane I thought of a far simpler idea. IF it is very similar to the rest of the guns, tell me. I will post the ideas etc tonight..

[Maggot6]

Zee gun 2

Alright, this is far simpl'er...
First, the red air(red the color) goes up into the lpr Then it goes into the orange color. The hammer (the dark grey color. ) The 1st green solenoid Pulls the hammer back, and then the stored air is allowed into the bolt. Then the bolt does it's thing and sends the ball flying. After, the recocking "faze" The second solenoid pushes a gear with 2 teeth. Either it pushes up or down, and the gear pulls or pushes the bolt back and forward (to let the ball in)

The blue blob is the battery, and the gun dewsign was done on mic paint dduring school...

http://img84.exs.cx/my.php?loc=img84&image=marker5qr.png

There is the link....

[ColdFuzion]

Lost me on the second gun style... But, I can tell you that it's like no other gun out there.

-Cold

[Lurker27]

http://www.automags.org/forums/showthread.php?t=145193&highlight=rotabolt

[Maggot6]

Alright, I will see if I can explain the second one better. Alright, the air comes through the foregrip, on my "high quality"( ) drawing. It is stored in what I beleive is called the low pressure regulator. And is stopped by some sort of hammer type thing)the grey blob on the bottom). So now the air is just waiting to be allowed to go somewhere. At this time, before any thing has been fired, the bolt on top, is in the backward position (NOT like my drawing). So a ball is in breach, you click the trigger, the verticle 'noid pushes that gear, resulting in the bolt just starting to push the ball forward, and then in the middle of that split second in time, the hammer type thing(technical aint it?) moves backwards (right). Now this air can go through into the bolt( see the little cut out in the drawing) And then the ball is pushed forward by the air.

Now, if anyone understands that, then I can go into further detail about how the bolt works, and everything else, I just wanted the concept to get out....


Lurker--I read about half way through, and then found out that the picture that would spell it out all together didn't show up on my monitor. But yeah, the only thing I THOUGHT might be a bit wrong is that whenever it cuts the extra seams in the paintball, what if a seam sorta like, sticks out like a hangnail and screws up the flight of the paintball?

[Lurker27]

The more important part is the rotabolt concept.

As far as hangnails, I doubt it. IT's really just created small deformations on the shell, not shaving anything off.