Pro Team

[Forino-x]

I have a RT-pro mag with a pro team body and I want to turn it into an E-mag.I never really believed in electronic guns until now, so I dont know very much about them. Do I just need the E-mag lowers or do I need other parts as well? Can I even put the lowers on my gun? Any help is greatly appreciated.
Thanks

[TMAXXKING1]

pics

post pics ..
it sounds like you have an rt valve in a ptp micromag ..
i have never heard of a pro team rt pro...

[Aleis]

If i remember correctly Pro-team products MicroMags are a 2 part design the body and grip, while standard mags have 3 the body, Rail and Grip frame. If you had a Normal mag you could just buy the E-mag gripframe, but i don't know if the Pro-team's grp frame is the same or different. You could check to see if a regular mag frame fit's on your gun if there's some one at your feild with a normal mag.

[Forino-x]

micromag

This is not my gun but its almost the same. Except my gun has a Rt pro valve, and there are a couple of other things.http://erraticstatic.com/images/mags...image=4&mode=1

[warbeak2099]

As long as you have a micromag RT body, all you need is emag lowers minus the rail. If you have a sear that is held in place by a screw that goes into the side of the body/rail, then you have a micro RT body. If you have a sear that drops in with a pin, you have a regular micromag body. If you have a regular body you can't do it. You need a body/rail that will accept the emag sear.

Emag lowers include:

Emag/RTP style rail (not needed with ptp bodies)
Emag sear
Emag Gripframe
Emag battery pack and housing

Total w/o the rail is about $300-350.

[Forino-x]

Trade?

Would you be interested in trading the lowers? I have a new, black powder coated minimag. I have a tippmann 98 w/ flatline, remote and rt trigger. My ps2 is also shot and im not going to by a new one so I have some games and controllers i could give you to. I f you have not gotton rid of them yet.
If not ill try and get the money asap.

[Forino-x]

pics

can you post pics or e-mail them to me at [email protected]. Also what color are the lowers and what softwear do they have.

[Gunga]

You're going to need a different sear. The E-mag & Micro E-Mags use different bushings in the hole for the sear pin, so the sears are incompatable. You'll also need a custom on/off pin for a Micro Emag.

[Tunaman]

You're going to need a different sear. The E-mag & Micro E-Mags use different bushings in the hole for the sear pin, so the sears are incompatable. You'll also need a custom on/off pin for a Micro Emag.

Listen to this man. He is the master. I believe you will also need the .065 plate that goes between the body and gripframe...