question about an ion

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Orion33
    Registered User
    • May 2004
    • 79

    #1

    question about an ion

    what is the max dwell setting..i dont know whati m at, i need to find a reference point
  • tippyjack
    Registered User
    • Mar 2005
    • 42

    #2
    I am not sure, but SP says that the best is 48 dwell( 48 pushes) But if you want to get the dwell easily, get a qev( find this on pbnation) and set the dwell at 7. I had the same problem,( 270 fps and 210 psi ) so I just took a qev I have and installed it. As far as your question, I have no idea.

    Comment

    • Geniusa100
      Registered User
      • May 2005
      • 45

      #3
      i believe that dwell is on a 1 to 100 point system. I would increase or decrease the dwell until it can go no more, then go back 50 settings. That should put you at around 50 for a dwell setting, and back where you need to be.

      Comment

      • ICP
        Who needs two tubes??
        • Feb 2005
        • 424

        #4
        The max dwell I believe according to the manual(if I remember right) is 58. Wich is actually I think 16 or 18 ms. Check the manual it will tell you the settings. Or check ion owners site.

        Comment

        Working...