Faster Warp feeder?

[papatango72]

-What is the best way to increase the feed rate of a warp feed?

-Can the warp run off a 12V/18V supply without any modifications or damage to the internals/motor/board?

-What is the fastest RECORDED delivery speed/feed rate, of a STOCK Warp feed, what is the fastest Recorded speed for a MODIFIED warp

Any help to these questions would be appreciated.

[Dayspring]

1- increase power to the motor

2- 12v only. The board will fry otherwise. You could try going straight to the motor however. Most people use a 12v regulator to get the 2 9v batts to the board's operating range.

3- variable depending on the hopper on top.

-What is the best way to increase the feed rate of a warp feed?

-Can the warp run off a 12V/18V supply without any modifications or damage to the internals/motor/board?

-What is the fastest RECORDED delivery speed/feed rate, of a STOCK Warp feed, what is the fastest Recorded speed for a MODIFIED warp

Any help to these questions would be appreciated.

[papatango72]

Thanks!! You just saved me a ton of work. Much appreciated.

[BigEvil]

Talk to Curtis from www.Havoc-online.com. He offers all of the warp mods for very reasonable prices.

Also, the 12v warp is substantially faster than the 9v.