Questions about the mag sear...

[warbeak2099]

All mag valves are going to have a stock trigger pull of around 3lbs. With the ULT it brings it to just under 1lb. A ULT will work on a classic valve, it just will reduce the rehcarge rate a little and might take some real fine tuning to get it to work right. Some people can do it and some can't. You're classic valve's recharge will go from around 16bps to 13bps. If you are using a pancake type noid in your e-frame, you must use a ULT.

[k0m0d067]

define "pancake" noid?

i'll be using this:

http://www.racegun.us/view_product.php?product=RGFramenoid

[Arstron]

the pancacke noid is what is used in most spyder/clones, I couldnt say if that noid will push the sear with the stock on/off or not, chances are you will have to try it and see.