AGD Flatline tank

[Narizo]

Okay so Im a rock, I got my flatline reg on my tank that I bought, and where you screw it in is tiny, now im sure you all our laughing right now, but how am I suppose to hook it up, I know now that I need an adapter of some short but what kind is my question, it is smaller than the normal threads on normal tanks.

Thanks for any information you guys can provide.

[ottomobile]

Huh? I'm confused by your question. Is the flatline regulator already mated to the tank?
If so you mount the tank to your marker using either a dovetail adapter or the stock dropforward. (either of these can be found at www.airgun.com) once your tank is mounted you feed it air with either of the two forward 1/8" ports. Macroline or standard fittings will do. Attach that to your regulator or air input on your marker.
Flatlines are not screw in so you can't use a standard ASA. Make sure you pull your output off of the forward ports. The rear ports are at tank pressure and unregulated. Adjust the nut on the tip to control output pressure. Hope that helps...

[Chris_automag_07]

the part that you think is the screw in adapter to an asa is where you adjust the tank.
You will not want to screw up the threads on that.