automag rifle

[Pacifist_Farmer]

Luke's vert feed is king

and that thing is calling for a qLoader

[eric_503]

yes i said warp feed

depends

[luke]

What did I offend you or something?

[eric_503]

no no its all good if any of you guys wanna help me with this/the mag pump kit or anything(testing products and stuff) feel free to catch me on aim at agdcanada or on msn at [email protected]

[Redmer]

This will work, I have done this on a mag that I made with a custom made stock.

nato- im not sure if its just my mag but the trigger pull is alittle odd i think its due to the linkage not being there

im going to try this you just turn the rod around (its attached threw the top hole then the rod is attached threw the bottom one so when its pull the rod and sear go back causing it to fire) also by this i can mount it prefectly to look better

[eric_503]

ya it works awesome i might sell it to get some more funds for another mag im going todo some work on

[nate2k191]

lol, thats sweet, good project. makes me wanna do it, but i sold my mech mags =\

[Sumthinwicked]

my thought on this after u get it lookin working and fully funtional get a black synthetic stock maybe like a mauser sniper i seen them for 50$ bran new and a black body be it vert warp or qloader what ever u want do it all balck with maybe a 18 in freak.... maybe some of the stuff u need machined www.docsmachine.com hopefully i helped

[eric_503]

sweet if anyone has a black synthetic stock and wants to sell it all have alook

[nevets11_2003]

Instead of a warp or qloader that would stick out, you could use one of these

http://www.specialopspaintball.com/shop/product_detail.asp?SKU=200+0002&CAT=107201301

[eric_503]

but its $150.00 i was thinking of just using the warp with like a revy or a ten round tube or like a magizine off a delta 68 or something similar

[ThePixelGuru]

Yeah, I've been thinking about trying to make some 10 round tubes for my 'mag. 3/4" PVC should do the trick, along with a spring and an elbow that'd actually let the balls go around it.

Damn those longbow loaders are expensive, though. I could get a QLoader for that...

[eric_503]

ive been trying to make a spring loaded loader/tube but i cant get it i have a piece of pvc that will hold like 15 balls but dont know the spring part

[awilli234life]

try it out mountungs your problem but you've made it this far

why buy either a arkon clip, 20 rounder and you'll be set

[etjoyride]

if you need a pump kit then talk to brad at paintball maxx. its easy to talk to him on phog.
http://www.bunkerboyz.com/phog/forumdisplay.php?f=13 (that whole section is devoted to brad)