Ok so i got my hyperframe back from having someone install the pred board, and it only cycles properly when i fire around 5 bps or lower. When i put it in 13bps full auto it dies. To me it feels like the noid is not kicking back hard enough at this rof. But i guess it could be anything. I really want to make this work right, i plan on signing up after the holidays; but darn it i want one last good day of paintball first.
I have the dwell set to ~40ms, bps set to 13, eye off. I dont get it, im woundering if the cap is screwy....sigh. I have tryed both the hyperframe on off and a ult, i addes 3 shims to the ult so see if length of the pin was a factor. Its on a classic valve (yeah and i dont want to hear "you need an x valve"; it performed (or did not preforme really) exactly the same when i put the frame on a retro valve).
Looking for tips, advice, and/or a nice pic of the devilmag innards. sigh...
I have the dwell set to ~40ms, bps set to 13, eye off. I dont get it, im woundering if the cap is screwy....sigh. I have tryed both the hyperframe on off and a ult, i addes 3 shims to the ult so see if length of the pin was a factor. Its on a classic valve (yeah and i dont want to hear "you need an x valve"; it performed (or did not preforme really) exactly the same when i put the frame on a retro valve).
Looking for tips, advice, and/or a nice pic of the devilmag innards. sigh...