what about a gun that has everything you want. much like a mag system with only one moving part lvl 10 system plus eyes all the psp modes plus it has to be gas eff. yet less bulky front barrty pack but here is the thing the body is one with the barrel. one soild milling starting from end to finsih. the barrel will already be on the marker but it will have or can have changable fronts but interlocking inserts. like a freak insert but instead of having to take the barrel off the marker you just pop the insert out, it comes out and then you put in the other insert. you say well what about ball breaks in the barrel. well take the angle bolt concept you know the chamber that just folds out and built that at the end of the barrel so when ever you get a ball break you just pull a pin the barrel camber falls to the side you push your cleaning rode through it snap the barrel chamber back in place and then pull the trigger and shot. this way you dont have to stop and put the squeegee down the barrel while its still on you all know that does not give a good cleaning. with the interchanable inserts and the one milling piece think of how small probfille this gun could have. any thoughts about it hope i explained it enough.
-
-
what you guys think my ideal is stupid
just joking any comments would be kinda cool
-
Paint size...
I think most everyone will agree w/ me when I say that paint to barrel matching is almost, if not more, important than the bun behind it. In that light, you are going to have issues w/ your design. Way back when, we were all buying multiple barrels for our guns to match to whatever paint we were shooting. That is why the uni-body Phantom vanished. The original MicroMags were all one piece, but changed almost immediately. Unless you have some way of slipping in inserts (Freak or other), you aren't going to have many takers.
Just my 2 cents. If your idea takes off, I'll buy one at cost plus 2 cents for my big mouth. If you use my idea, you owe me 2 cents.
ShivesComment
-
but thats what i'm talking about, having intrgraded sleeves that you can interchange with other inserts so that you can change the bore sizes just not have to mess with screw threads i dunno its late and i'm tired
Comment
-
My post count & BAC rise together...
Sorry, I guess I need to read more carefully. You did cover that...
ShivesComment
Comment