AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Stock BKO (so far)
68/3k Carbon Fiber Crossfire tank
Halo B
woot! :headbang: :headbang: I can tell that my parents hate me. My bath toys are a toaster and
a radio.
new regs.
does it have pds?
do you like the idea of a y/z grip? they make one for the bushy.
you could also try milling it some, they are quite heavy.
you could really try to mess with the electronics and see if you can get rid of the tray. i'm sure you can find some kind of smaller board/noid out there.
an important thing with a bushy is to have the trigger stops set up right. one of my buddies has an imp (same thing) and the trigger is set up horribly. my other friend let me tweak his trigger and it now has a light crisp pull that beats anything i've felt. there are three set screws. pre travel, post travel, and switch activation. ideally you want the switch activation screw to be touching the switch at all times. pre travel and switch activation will do this for you. then you only want the trigger to move as far as the switch needs to move to fire. this is done with the post travel screw.
if you already knew that... cool. knowing is half the battle.
Comment