I just got an emag alve and I can't get it to work. it has a level 10 it wasn't working (leaking down the barrel) changed to my level 7 cause I don't know much about level 10 set ups yet and just wanted to check the valve. it still leats down the barrel a very minor amount. but it has a serious recharge problem and almost to kcik back on the trigger, which im positive are related. any ideas? maybe any mag geniuses in the knoxville TN area?
-
-
also has a ULE trigger... according to the AGD website, this is a no no. any input? -
If that emag valve is in an Emag then yes it is a
to use the ULT. You need to then have a Emag on/off and don't foreget the quad oring for it to. As far as leaks go with the level10 down the barrel reinstall it minus any of them thin shims if it leaks try a smaller carrier. When you have it not leaking add the shims. When it reaches the point of leaking. Take one shim out. Red spring is what you want. You'll have to crank up the velocity to use it though. If it starts leaking out the back of the valve, replace the reg piston assm. You can get the parts you need via AGD store or Tuna sells them.
Comment
Comment