Warp setup

[Oddball91]

im looking at getten the warp feed setup. i will get the warp and the warp feed body. only thing is that i have heard some bad things about the two.

for the warp feed i have heard that it jams and the battery dies quickly.

for the body i have heard that it is hard to get the body to fit on the frame. and on the AGD site it says that they can do the mod, has anyone had them do it (cheap, well done, etc.)? i will be using a 68 classic for my setup.

[ThePixelGuru]

My Warp never jammed when I had it. Just keep the discs lubed and you won't have a problem. As for rail modding, I know luke does it. He also modifies classic bodies to warp or vert feed, if you want to go that route instead of ULE.

[Oddball91]

who is luke?

[Mechanic79]

warp and rail

check out luke in the dealer section.

If you get your rail notched for the warp you may as well get it ULE'd too.

Do the "Big Cell" mod to the warp and it will last all day with 9V rechargeable Maha batteries.
(Big Cell: uses Two 9V batteries at double capacity, not double the energy)

NOTE: use the same type of paint at a time, don't mix small and large bore. and generally, the better quality (round) the paint the less issues.

You will get out what you put in...

Mechanic79

[luke]

www.lukescustoms.com

[ThePixelGuru]

You will get out what you put in...

What, paint? I'm awesome. And yeah, ^ that luke.

[Mechanic79]

paint and warp

This is just from my experience, use what ever paint you want,

I've had Good luck with:
Midnight and better
Worr paint
PMI Premium
Chronic

I've had Bad luck with:
Anarchy
All Star
Evil
Great American Paintballs
Any 2nd's and bargain style paintballs

Keep in mind, paint changes all of the time, so it may be good at one point (this year for example, or this batch) and may be bad at a different point in time (next year for example, or next batch).

NOTE: any good quality, consistently ROUND paintballs are worth the $$$ and less hassle. They won't jam up in the warp hose, especially if you use a center feed style body.
Since I've switched to a ULE warp style body I haven't had one jam yet.

[Oddball91]

the part that you have to dremal is the black part the is uder the body, its the spot were the warp neck site on. u have to make a half circle.......right?

[Mechanic79]

the part that you have to dremal is the black part the is uder the body, its the spot were the warp neck site on. u have to make a half circle.......right?

Check out the pictures here: http://www.kemicalreaction.com/devil...paintball.html

[Oddball91]

thanks all of my questions are answered

[Oddball91]

is this all of the modifing that is needed to fit the body?

[Mechanic79]

Yes!