I have an old 68 Automag, with the battleship grey standard right feed. I am curious if there are any methods that I may use to go about polishing the body with a dremel. I really do not want to take it to an autobody shop, as this is a project gun. Thank you for the help.
-
-
lots of different grit sand papers and elbow grease. Followed up by polishing compounds and more elblow grease.
-
Don't use a Dremel, I'm forever fixing peoples attemps to polish with it.
Comment
-
what finchman said, do it by hand.. it's alot of work, but if you work through every available grit from about 200 to 1000 and then polish you should have a very shiny mag.Comment
Comment