Pneumag Questions

[Corbet]

I asked these in the big thread but they were never answered:

So does the QEV do anything in this mod or not? If it actually is useful I'd be willing to mill my Chimera frame but I'd prefer not to.

Would this work with a classic valve?

How exactly does the sear connect to the actuator?

In the directions why is there so many different kinds of barbs? You've got:

10-32-3/32 barbs (3)
11752-5 (1) (Clippard 10-32 Single Hose Barbs)
11750-2 (1) (Clippard 3-56 hose barbs for 1/16" ID tubing)

Are these all really needed? Arn't only 3 needed (2 go on the MSV-1, 1 on the MPA-3)?

Also, whats the best type of macroline needed? And where can I get
Riv-Nut P/N NAS1329A08-75
Screw P/N MS24694-S3

[geekwarrior]

i cant answer all your questions, but I'll tell you what I know.

I dont think the sear is connected at all, the actuator is just positioned in front of the sear, and when aired up the force of the sear holds it against the actuator.

The LPRis necessary, You can mount it off your on/off or asa, many have holes on both sides.

I think you can do this with a classic, the only concern is if you need a ult or not, I dont think you do if you do the mod correctly.

And I think all the different barbs are depending on what hose size you want?


and as for parts, I think airsoldier.com or something like that has the parts you need.

Again, Im not an expert on all this, but its what I've gathered from reading.