My pneumag.. done by pneumagger

[zyklon69]

[bentothejam1n]

pleaseeeeeeeeeeee resize your pic
but it looks good

[zyklon69]

Gun shoots good, i can't walk it though, im not sure what causes me not to be able to do it. I have no problem walking electronic guns though. Maybe it's the lack of the sear stop and no QEV? Any ideas?

[Pneumagger]

A QEV is more of a luxury and should never need used by any mere mortal. With reasonable input pressures, the QEV shouldn't have much impact at norma rates of fire. IMO the sear stop is pretty well pointlass on a ULT'd mag for 2 reasons:
1) The sear travel past the activation is miniscule (depending on the # shims) to point where not having a sear stop on a ULT setup would cause negligable piston excess travel/inefficiency. Plus with a stop you might not have the sear disengaging the bolt well enough if the sear stop is indeed taking a hit.

2)The ULT is made with an internal bushing that the Stainless pin contacts prior to becoming flush with the brass body. So the sear should never actually contact the brass portion of the body and the wide stainless head shouldn't mushroom ever with any reasonable LPR pressures.

I suggest eliminating any short stroking by make sure the trigger pull is not too short as to starve the 3 way for air... and not too long as to increase the likelyhood of a sloppy tigger pull. Also be sure to have sufficient LPR pressure + 1/4 turn for good measure. And be sure you're ULT is tuned well - an RT on/off works well too.

I've found that many electro shooters have a hard time with walking the trigger cleanly *cough*behemoth*cough*cough*. There's no processor/debounce/buffering/whatever to distinguish shots when "drumming" on the trigger. When you walk be sure the pulls are clean, evenly spaced, and fully pulled/released I short stroke ocasionally aslo too
Behemoth and I made a video yesterday shooting an I-frame with no QEV/stop... in the video, he shoots it like poo and I don't... however put a borg in his hands and he's freakin' Rambo

[Pneumagger]

Secksy mag by the way!

[Dark Side]

what does the QEV actually do for the mod anyhow?

[benzy2]

What do you think that setup would pull in the open market? Im not looking to buy I just was looking at doing one close to that and was wondering if it would be worth the money.

[Pneumagger]

It's probably worth more parted out

[zyklon69]

my mag is finally done.

[Pneumagger]

secksy Grips!

[just a karni]

what kind of grips are those ive never seen them

[longi]

Dye sticky grips.

[zyklon69]

gotta refresh longi, those a killergrips, from killergrips.com, they're sweet

[longi]

I think i must have been looking at the wrong piccy!! Lol! Man they are nice grips!