What Trigger Frame

[Wolfboyz]

What do u guys think would be the best / cheapest, easiest way to go

Booyah Electro Frame

Hyperframe

Pneumag (might already be getting all the parts needed other than a frame)

Spydermag ??

plz get back to me on what each ywould cost, maybe ever a positive negative feedback on all.
by this friday i will chose 1 and started my project
ty

[ZapTheMad]

Booyah/Hyperframe positive: No dremel needed.

[Wolfboyz]

are they both about the same?
can i use them on a classic valve

[KC]

Dont know about the use on a classiv valve. But most feel the hyperframe is much better then the booyah.

[going_home]

Get an Emag

Having tried BooYahs,Hyperframes, and Emags, I would say you would be better off
getting a used Emag.
Much better and you can upgrade the software to the Xmod and its as fast as an Ego.
I got rid of my 06 Ego when I got the Xmod on my Emag.
You can pick an Emag up for fairly cheap now and you will be much happier with it
over an add on electronic frame.

[Wolfboyz]

well i fouind a hyperframe for 200
nd booyah for 175
cheapest emag lowers i have found is like 350
am i just looking int he wrong place

also doing a pneumag would cost around 130$# just take some time

[maddboy32]

i like the hyperframe over the boo-yaah. just because you can get the hyperframe with a 20bps, which is nice. both will need a ult for your valve. neither are up-grade-able (sorry, is that a word??). yes the emag lowers are nice, i've just never had any. pneumags haven't gotten that far into paintball yet either. so i don't have an opinion on those two.

[Jaan]

i like the hyperframe over the boo-yaah. just because you can get the hyperframe with a 20bps, which is nice. both will need a ult for your valve. neither are up-grade-able (sorry, is that a word??).

You can upgrade at least the Hyperframe with a new aftermarket board, which is a significant upgrade. That also opens up the possibilities of buying an older Hyperframes with the semi only 13 BPS boards, and upgrading it.

[the electrician]

the hardest but cheapest way:

use a cocker hinge frame, bolt pattern lines up perfect and plenty of room. I bought one for $15!

buy a used lpr, and the rest of the components, throw it in the mill and make it work.

like I said, cheap but not easy.

[pump]

i wish there were pics of the hyperframe and part numbers

would like to try putting the stuff in a gutted eblade frame


or i would like to do a Mini/emag style fore grip with the battery and board and wire that to the noid in the frame and then have the air go through the grip as well....oh dream mag

[Wolfboyz]

i was thinking about using a eblade
using a cocker hinge frame or something tho is not gunna get the speed needed in todays speedball, buying a chimera frame and all the required parts for a pneumag is the cheapest but one of the hardest ways to make FAST mag

[Lenny]

i was thinking about using a eblade
using a cocker hinge frame or something tho is not gunna get the speed needed in todays speedball...

NEEDED!!?!?!!1! in today's paintball? C'mon! I play pump in speedball and it's not that hard! Speed is not a necessity!

...buying a chimera frame and all the required parts for a pneumag is the cheapest but one of the hardest ways to make FAST mag

What a load of BULL! (Joe, feel free to chime in with a few of your vids )
And you don't need a Chimera...

[Wolfboyz]

bull? bud you can get the pneu kit for around 50 bucks used lpr for 30 and a frame for 60
150$ and its FAST marker

what do u suggest thats better than that for cheaper?

and also, i;d love to play u with your pump on the speedball field, i'll rip a string all over yer back

[Lenny]

bull? bud you can get the pneu kit for around 50 bucks used lpr for 30 and a frame for 60
150$ and its FAST marker

what do u suggest thats better than that for cheaper?

and also, i;d love to play u with your pump on the speedball field, i'll rip a string all over yer back

If you reread what I had quoted, you said it was hard to build a pneu to be fast. Or at least that's what I got out of it. Have the frame widened, drill a few holes, set some screws, fine tune your LPR and your done! Your gun is now mechanically fast. It's really not that hard.

...And if we ever meet, I'll take you on vs. my pump. Just don't start thinking that because more paint's in the air, you're suddenly going to hit me. If you think that way, you've already lost.

an lern 2 use some punctuation and capitalizet hings sometimes
myt help u sound smarter
and the dollar sign goes in front of the 150 by the way

/sarcasm

[Wolfboyz]

ok bud your hot **** eh real cool guy
how about you go play with your pump gun on the kiddy field and leave the paint sprayin to the big boys, YES pump guns are accurate, but to win a fire fight the key is lots of balls and accuarcy, your 1 ball will get shot down with my string and then what u doin? look around for a 12 gram
i really don;t give a rats behind about punctuation because this is the internet and i am not writing a damn paper i am in a forum where casual chat is not fround apoun , i put the $ at the end cause thats were i like it one hundred and fifty dollars 150$ sound it out smart guy. if looking smart mattered so much to youm then i would suggest getting a face lift
ALSO this is my thread and since u cant read i will spell it out for u

W H A T T R I G G E R F R A M E
not
Tell me about your pump gun and how it isn;t hard to make a pneumag


so if you wanna have a cock fight, go some where else, cause this thread is asking what people think is the best trigger frame
anything else is un acceptable



just so everyone knows i am getting a Dragoon LCD spymag frame