Here are a few of my new projects. Now that I am home from school, I have access to all of my tools and a mill.
The first is a Timmy framed mag. This is still completely mechanical. There were a few things I had to do to get this working. First I had to make the custom rail from delrin. Once that was set, I had to move the trigger down about 3/8 of an inch so the sear could travel correctly. The body is fastened through the rail in the center mounting hole, and the rail is mounted to the frame through the stock hole. The valve is also attached through the stock frame hole. Yes it does work and has plenty of reactivity as well.
The second project is my mini-trilogy sniper. This is still is progress, and needs only a few things to get running. I milled the stock feedneck and attached an Ego feedneck. I think this makes it look much nicer. I also milled off the ram mount. The front was milled past the stock asa. I am in the process of making the pump guide where a mini asa will attach. Look for updates in a few weeks for this one.
The first is a Timmy framed mag. This is still completely mechanical. There were a few things I had to do to get this working. First I had to make the custom rail from delrin. Once that was set, I had to move the trigger down about 3/8 of an inch so the sear could travel correctly. The body is fastened through the rail in the center mounting hole, and the rail is mounted to the frame through the stock hole. The valve is also attached through the stock frame hole. Yes it does work and has plenty of reactivity as well.
The second project is my mini-trilogy sniper. This is still is progress, and needs only a few things to get running. I milled the stock feedneck and attached an Ego feedneck. I think this makes it look much nicer. I also milled off the ram mount. The front was milled past the stock asa. I am in the process of making the pump guide where a mini asa will attach. Look for updates in a few weeks for this one.
