Morlocked Hyperframe problems

[chettacheez]

So I just put a morlock in my hyperframe and it will not fire. It seems the solenoid is not pushing the sear back enough to let the bolt release.

Any ideas?

[AirAssault]

Make sure your dwell is on like 6 trigger pulls, (ms?). I had the same problem with my devil mag frame and that fixed it.

[flyingpootang]

Do you have a capacitor wired in parelle with the battery +/-? It allows the board to store enough voltage that the noid needs to be activated.

[chettacheez]

Do you have a capacitor wired in parelle with the battery +/-? It allows the board to store enough voltage that the noid needs to be activated.

Yea the cap is wired in correctly. I'm going to try the dwell.

[stonersr26]

The solenoid can also be adjusted by loosening the 4 set screws and moving it. If the screws came loose your solenoid may have pushed itself back far enough to where it wouldn't trip the sear.

[Coralis]

do you have a ult or centerflag on/off installed ?

[chettacheez]

Got it working. Messing with the dwell fixed it.

Thanks guys