<<<< August MOTM Contest >>>>

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RRfireblade

    • Jun 2002
    • 5103

    #1

    <<<< August MOTM Contest >>>>

    Temp Edit: Since an apparently mind boggling and seriously upsetting amount of confusion has surfaced over the Oldskool division of MOTM. I guess it's my fault since I allowed 'Classic' to be latched onto over 'Oldskool' which was the intent and point I had in mind and I had no intent on limiting it to Classic Mags only I've started this thread to help clear it up for future MOTM. Please add any input here . . .

    Paintball Talk is the main forum for Automags.org. Here is where we talk about the sport of paintball in general and make announcements relating to the forum and website.


    Thanks.



    TWO DIVISIONS Thanks to Tom Kaye and the enduring overseeing AO Mod staff who contributed additional $$ to help cover costs (in this case t-shirts) of another class . . .

    MOTM will now run 2 categories , Standard Open Class anything goes and an "Old Skool" Mag competition ! !

    Please state which division you want to be in (Open or Classic) in case yours could go either way.


    Round 8! !


    "MAG" of the month contest...that means MAGS of any kind.

    I want to see some kick butt mags ! ! !

    I will do it every month there seems to be continued interest , voting towards the end of each month, new contest on the first-ish of each month.

    Near the end of the month I will narrow it down to a Final 5 (or how ever many I think are worthy) and open a public voting poll to pick the winner for each division. Entries are valid until I close this thread.


    Rules:

    1) Must be your Mag and NOT for sale during the month of the contest.

    2) I don't care how great or sucky your pictures are, it's a gun contest not a photogenic prize.

    3) 2 pictures MAX , NO GIANT WALLPAPER sized pictures....post a link if you need to or link to any larger pics.


    **This is the code to resize and thumbnail your pictures. Copy and paste and add the link where it says to.**

    PHP Code:
    <a href="Picture URL Here"><img src="Picture URL Here" width="600" height="450"></img></a> 
    
    If you can't figure out how to host your pics , I will get them hosted for you.

    FYI , It is to YOUR ADVANTAGE to simply post 600 x 450 or so sized pictures , they will look far better than the code resized pictures.

    4) One gun entered per month per Class. I'll allow you to enter one (different) marker in each.

    5) No previous contest winner entries unless it has changed drastically , give others a shot please.

    6) No text posts ...PM all questions to who ever you want to ask what ever you want to ask.


    I will be judging on what I think is cool or worthy ...

    Generally it breaks down like this-

    Open Class MOTM :

    As in anything goes as long as it's a mag , wow us.

    Just a note ,

    I'd really like to see full functioning markers , those will get priority over the same parts just stacked up for a picture.


    OldSkoolers :

    Looking for anything falling under the guise of Old Skool Spirit , lots of SS parts would be cool but that's fairly subjective. Could be rare , unique or just plain old. Anything that cries yesteryear whether a Classic Custom or just Classic Cool.

    Since an apparently mind boggling and seriously upsetting amount of confusion has surfaced over the Oldskool division of MOTM. I guess it's my fault since I allowed 'Classic' to be latched onto over 'Oldskool' which was the intent and point I had in mind and I had no intent on limiting it to Classic Mags only I've started this thread to help clear it up for future MOTM. Please add any input here . . .

    Paintball Talk is the main forum for Automags.org. Here is where we talk about the sport of paintball in general and make announcements relating to the forum and website.



    Prizes:

    Again from KRUGER : I would like to offer a set of wood grips as a prize for the MOTM winner. It must be either 45 frame or Emag frame, and my choice of wood. I would only require a pic of the marker that the the winner wants them for, so I can judge what wood to use.

    I may offer this for each month, but we will see how it goes.

    Due to extended shipping costs outside of the USA , Winners outside of the US would have to cover the shipping costs however.




    Airgun Designs Lion Stickers (probably a few).

    New Design for 2007 ! !

    MOTM/GOTM T-Shirt. It will be one size only , XL with this design on the pocket and large AGD Lions on the back .....







    Yeah , That's Right.




    Anything "sponsers" want to add at my discression (contact me first please)



    That's it....GO ! ! !

    Jay.
    Last edited by RRfireblade; 08-15-2007, 02:57 PM.
    Logic Paintball Forums
    My A O Feedback Here
    Other Feedback Here
    If I've Been Any help
    Please Leave Some. :)
  • originalspyderxtra
    Registered User
    • Jul 2006
    • 114

    #2
    yeah first post, getting started early. im entering the classic competition.
    specs:
    classic r/t mag
    matching number valve 4046
    lvl 10
    16in cp barrel
    did my own intelli mod
    warp feed (micro plug batter mod)
    halo (v35, atomicmods racing motor, micro plug battery pack mod)



    Last edited by AO Moderation Team; 08-05-2007, 09:30 AM. Reason: resize or use the code

    Comment

    • Dewok82
      Registered User
      • Apr 2006
      • 433

      #3
      CLASSIC PLEASE!
      Sure it has some modern amenities, but I still rock it on co2 - any day of the week.

      (I know my pictures suck...I'm sure my digital camera is worth about $25 nowadays...






      Sometimes I want to replace the sideline stabilizer with a male, but then I'd lose the coolness of the Stick Grip. It shoots really nicely for how it's presently set up.

      Specs:
      AGD MiniMag Valve with Level 10 (tuned, duh.) and currently an R/T on/off installed.
      Nickel Intelliframe with blade trigger and Dye Sticky 3's.
      Nickel ULE Body with CCM Clamping FeedNeck
      CP Rail & ASA
      RPG Stick Grip
      RTP Rail milled by Luke and anodized dust black by Gruntbull
      Palmer's Sideline Stabilizer

      I'm currently running the Valve pretty much wide open and letting the stabilizer dictate my input pressure.

      MY BAD AO MODERATION TEAM - I hate wallpaper size pics as much as anyone else, but I honestly thought I resized them. I usually do 800x600, but from now on I'll keep them 640x480 or thereabouts.
      Last edited by Dewok82; 08-08-2007, 08:18 AM.

      Comment

      • BlueMagRT
        Assimilated Member
        • Jul 2001
        • 185

        #4
        OldSkooler Class

        Classic RT with factory blue smear anno
        black teflon warp left body
        lvl 10 installed
        matte black intelliframe
        matching blue warpfeed with on/off and led
        matching blue 12v revy with custom warp tube mod
        centerflag drop forward
        centerflag hyperflow 68ci 4500 tank
        blue dye tank cover
        blue covered ss hose


        Comment

        • PrimoRocker
          The boy who never grew up
          • Mar 2005
          • 130

          #5
          Old School Automag Competition

          68 Automag:
          A.I.R. valve with level 7
          black powerfeed right mainbody
          AGD 13" crown-point barrel
          ViewLoader 200 hopper
          AGD nickel fittings and quick-disconnect
          steel-braided hose
          duckbill bottomline

          Comment

          • jakeman7676
            Registered User
            • Aug 2007
            • 96

            #6
            CLASSIC:
            68 Automag
            Red Marble Anno
            PMI Expansion Chamber
            Level 7 Bolt




            Last edited by jakeman7676; 08-18-2007, 07:08 PM.

            Comment

            • RRfireblade

              • Jun 2002
              • 5103

              #7
              For Sumthinwicked :



              Logic Paintball Forums
              My A O Feedback Here
              Other Feedback Here
              If I've Been Any help
              Please Leave Some. :)

              Comment

              • dstud2000
                Demon Slayer

                • Aug 2007
                • 491

                #8
                open class

                It's special cause it is mine





                Shot with Canon PowerShot A510 at 2007-08-10


                Shot with Canon PowerShot A510 at 2007-08-10
                Last edited by dstud2000; 08-15-2007, 11:25 AM.

                Comment

                • cyberave68
                  www.BigEvilOnline.com
                  • Feb 2004
                  • 1084

                  #9
                  Open Class...

                  OK i'll try open class:

                  Gloss black Karta body and rail
                  Black X-valve
                  Black Airwalk frame with pneu's, viper blade trigg, and custom engraved panels
                  Black custom foregrip
                  14" tribal stix barrel


                  Zero Gravity Customs

                  Play hard or go home......
                  My feedback
                  http://www.automags.org/forums/showthread.php?t=129891

                  Comment

                  • lasrsktr
                    Registered User

                    • Aug 2006
                    • 945

                    #10
                    Sometimes you just cannot pass over good deals and when that happens...

                    well you make the best of it.

                    I came across a smoking deal on the Body and rail and that lead to the following creation!

                    I like to think i stuck with a theme and kept it going.

                    Hope you guys like it..

                    Dallara Body and Rail
                    CCM Lo Rise Feed Neck
                    Polished Freak Back
                    Blue 12" freak front
                    RPG ULF Intelli Frame
                    Stick Grip
                    Blue X-valve w/ Emag on/off
                    Blue Classic Viper Blade



                    Comment

                    • AronMsmith1987
                      Nasty SC Pirate!
                      • Jan 2007
                      • 200

                      #11
                      Straight Up Old School

                      Old School mart Mag # CF16270
                      Grey High Rise Direct Feed Right Smart Milled Body (Factory)
                      Matching "Magic Box"
                      Matching Trigger Frame (Sorry it was cut for a Double Tigger)
                      Old School SP Wood Grips
                      Matching Fore Grip (Non Gas Thru)
                      Matching Barrel
                      Smart Mag Valve A-Dvanced A.I.R. Valve # CF16270 Matching front and Back
                      LVL 7 Bolt
                      Stock Rail with optional Rear mounted ASA
                      Sorry the Urban Camo Anno I am sure is not factory but hey what can I do it looks good

                      Its a little beat but just as trusty as the day it was new... Thanks AronMsmith1987

                      Bought it Straight from a field in Austrailla and love it to death....



                      Oh and yes I have more this is just my favorite, Enjoy..

                      Comment

                      • pendulous
                        Registered User
                        • Jul 2006
                        • 46

                        #12
                        Mags

                        Standard open class

                        X valve
                        Hyper frame
                        Ripper body and anno by Xmagterror AOer
                        Lucky barrel
                        Apologize if I did not get the pics in right format. First time posting pics


                        Last edited by pendulous; 08-19-2007, 02:59 PM. Reason: Forgot to specify category

                        Comment

                        • zazzoo
                          Registered User

                          • Jan 2005
                          • 843

                          #13
                          Ripper Mag

                          Tyson Machado shark tooth Rail
                          Xmagterror polished Ripper body (first one made)
                          Airwalk With Cyberrave panels
                          15* asa
                          Titanium Boomstick(not pictured)
                          Xmag Valve

                          feedback
                          http://www.pbnation.com/showthread.php?s=&threadid=848340

                          http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback&userid=davidsimpson&item=-1&frompage=222

                          Comment

                          • Madmarx
                            Mentally Unstable

                            • Jun 2006
                            • 2867

                            #14

                            Comment

                            • ~W.!.C.K.E.D~
                              Registered User

                              • May 2006
                              • 139

                              #15
                              Oldschool


                              Comment

                              Working...