ICD Promaster. I NEED HELP! PLEASE!

[ICDxBushmaster50]

I have the ICD Promaster and I have gotten alot of upgrades and what not on it. I have recently encountered the problem of not knowing how to put a new reg on it and taking of the stock reg.
(I bought the Dye Hyper 2 reg, by the way)

I can remove the stock reg but then there is another peice that I am usure of how to remove.

PLEASE HELP ME! ANY HELP AT ALL!!

[trevorjk]

all you SHOULD have to do is just take the old regulator off of the vertical ASA...

[buzzboy]

Is it a strange air fitting or something inline with the reg.

Remember, A picture is worth a thousand words.

[fullofpaint]

my friend has one,and I THINK that there's a small piece that's part of the reg but it tends to stick in the ASA, if I'm right you should jsut need to take a strap wrench to get it off

[going_home]

ICD Site

http://www.icdpaintball.com/icd05/pdfs/manuals/PromasterManual.pdf

Our business hours are Monday thru Friday, 8am until 5pm (Mountain Time). Indian Creek technical support can be reached via our E-mail support address: [email protected] or call us direct at: 208.468.0446 or you can write us at:

Indian Creek Design
1019 First street North
Nampa, ID 83687

P 208.468.0446
F 208.468.6650


That was all taken from the ICD site.
Maybe give them a call before you mess up your marker.
Hope this helps.

[spwz99]

threadjacking to follow...

ICDx, in all that upgrading did you happen to buy a new board? if you did and you would sell me your stock one, pm me please. i might need it to fix my promaster...

[ICDxBushmaster50]

Delete this thread.

[Lenny]

^^You can do that youself, y'know?