Armageddon tank rebuild kit, where to get it

[devildog]

Hey everyone. Back in the day, the armageddon was the tank to have. I still have 2 of them, but they need to be hydroed. Before i send them out, i need to rebuild the regs. Anyone know where i can get the rebuild kit? I searched but came up empty (im not good at the internet). thanks for the help

Dominik

[olinar]

the only place i can think of would be ebay. they etnd to have air america rebuild kits up for sale every once in a while.

[devildog]

what has this world come to? /cry

(ive been out of the sport for about 5 years)

[olinar]

your tellin me, ive had a raptor for a year and a half now and twice not the reg pin was bent out of shape at the pro shop. i havent been able to find a 2nd replacement so i swapped regs

[Shane-O-Mac]

If the 'Geddon was working fine then no need to rebuild. Take the carrier out, clean it and the piston (the piece the carrier rides on) and lube it with air gun oil, not grease. As long as its not leaking or otherwise not working properly, leave it be. If you really feel the need to replace parts, get 2, 16-70 o-rings and replace the ones on the carrier. Thats about all that goes bad on a 'Geddon. On the "Arm" of the reg, (the part on the tank) you can flip the seat if its leaking. Its the only AA reg you can do this on.

Bent pins on raptors, usually happens when the adjuster is screwed too far in before filling. It shouldnt happen often. Or the tank was slam filled from empty, which is prolly what happened to your tank.

Parts for most AA regs can be found on ebay, under the name AAchopshop.

[magmonkey]

if you do need a rebuild kit, check with the Air America chopshop store on ebay, last I checked they still had team rebuild kits

[olinar]

ya, thats where i got my reg pin for my raptor. aachopshop only had 2 pins so i picked both up.

the first time it was bent prior to me receiving. previous owner musta done it, the second time my proshop accidently did it but i have no pin to replace it with.

np though, i just picked up a nitroduck ireg with 1000 psi piston thatll be going on my new tank. very nice!

[going_home]

Several on Ebay

http://cgi.ebay.com/Air-America-80pc...QQcmdZViewItem

http://cgi.ebay.com/AIR-AMERICA-APOC...QQcmdZViewItem

http://cgi.ebay.com/AIR-AMERICA-APOC...QQcmdZViewItem

Not my auctions but hope it helps.

[devildog]

thank you, i actually bought one of those.

THANKS FOR ALL THE HELP EVERYONE!!!!