Who works on raceguns?

[punkncat]

Does anyone know a reputable place, preferrably in the SE that works on and has parts for a racegun?

Divenaux (or something close to that) used to be a tech. Is he around anymore?

I need the charger, programming cable, and someone that knows how to get it up and running with an MQ valve.

[CKY_Alliance]

I know where you can get a brand new one with the charger,software , and cable..

Im assuming they dont make them anymore? I thought they just released a new one not long ago.. have you tried to contact the manufacture? You might be able to get the cables at a computer/electronics store.

[d4m4don3]

Divenaux (or something close to that) used to be a tech. Is he around anymore?

He's recuprating from cemotherapy; but yes he used to work for Racegun.

[Ruler_Mark]

it should be the same as a eblade,, you plug it in where the old pancake plugs into the board,, then you increase the panake's on time

[Chaos_Theory!]

Race frames dont usually work all that well with mQ valves. Just thought id bring it up in case you didnt know. Finding parts also isnt easy anymore since they arent making them now. Divenaux is Jim from Ape who is recoviner from leukemia as someoen said. You may want to contact Barbs Paintball on ebay, they carry a lot of ANS/Race parts.

[punkncat]

This marker originally came from Jim....didn't realize he was Dive

I know nothing about raceguns. This one was purchased, forgotten about in a box, and hasn't been touched in a long time. In that time the charger and link cable were lost. On top of that I know nothing about MQ's either.
I have basically been handed the marker in question and asked to see what I could do with it. So the battery is completly dead, and I have no idea what to do about it.
Anyone know what voltage charger the battery needs?
Is there a way to adjust settings in the board w/o the cable?

[BigEvil]

This marker originally came from Jim....didn't realize he was Dive

I know nothing about raceguns. This one was purchased, forgotten about in a box, and hasn't been touched in a long time. In that time the charger and link cable were lost. On top of that I know nothing about MQ's either.
I have basically been handed the marker in question and asked to see what I could do with it. So the battery is completly dead, and I have no idea what to do about it.
Anyone know what voltage charger the battery needs?
Is there a way to adjust settings in the board w/o the cable?

I have two raceframes sitting here that Im going to gut for projects. LMK what parts you need, I may have spares.

[Enemy]

i actully have the cables up in my room and i believe my teammate that had the race frame sold it but let me ask him if its ok for me to give away his stuff before i make any promises

[Warwitch]

OK, here is the deal.


#1: Raceguns rock (when they work)
#2: Raceguns almost never work!
#3: Raceguns hate MQ's
#4: Jim is not working on Raceguns at this time
#5: If you really want the problem solved you will have to send it to Denmark. Contact Jonny2 on the Racegun.dk forum.

Mine has been all over the US since the day I bought it. Tom at Raceguns.us is a douche. He aspires to be a Billy Gardner. He built and sold me a $1,500 marker that has never worked. So now its in Denmark getting the loving attention it deserves. Hopefully I wont have to turn it into a pump.

Just to clarify:

Tom at Racegun.us cannot be trusted. Never buy anything from them. Never send them your marker or you wont get it back!!!

[AzrealDarkmoonZ]

Second the don't deal with Tom. Air-powered went with Tom to get our IAO jerseys, 4-5 months in advance. They didnt show up the week of the event so I called Tom and asked him where they were at, he said they would overnight them to the hotel. Yet I never received them, when I called I was pretty pissed and just got my money back.

[Rudz]

dont like ole tom at race gun US? sorry you had a bad experience, i never had a business dealing with the guy, just met him a few times

[Warwitch]

dont like ole tom at race gun US? sorry you had a bad experience, i never had a business dealing with the guy, just met him a few times

The reason lyou havent had any bad experiences is because you never had any business dealings with him. Net time you do tell him Simon says "You suck".


Anybody with questions as to his character please visit the Racegun.dk forum and ask around. Im not trying to flame. This guy will rip you off.

Sorry, back ot, I will be seeing Jim in the next few days. He has been out of the loop for a while but I will see if he can recommend someone.

[punkncat]

I have the racegun in my possession. Warwitch, I am hoping you were able to get those cables out for me to use.
I am told I need to use a program called RIP to program it, and have found that on racegun's site.

Does anyone have the lower internals for a halfblock? I need the hammer, lug, and I am assuming I can use any standard cocker valve, avg etc?

[Ruler_Mark]

I have the racegun in my possession. Warwitch, I am hoping you were able to get those cables out for me to use.
I am told I need to use a program called RIP to program it, and have found that on racegun's site.

Does anyone have the lower internals for a halfblock? I need the hammer, lug, and I am assuming I can use any standard cocker valve, avg etc?

as for your internals Q, you can use any cocker internals you just need to get the top of your hammer slotted

[punkncat]

as for your internals Q, you can use any cocker internals you just need to get the top of your hammer slotted

I am unsure of how the hammer lug catches the block. There isn't a slot or stop on the block. Only a hole that may be threaded, I can't tell.