CAD files?

[tech-chan]

Does anyone have the CAD file with the ule body, rail, and the intelliframe? Also, does anyone have the CAD file for the micromag body? And the threads for foregrips/air tanks? Pm me if you have one of these or all of them and I will give you my email.
-Jeremiah

[Chronobreak]

specs are in tech forum sticky i believe

otherwise try haveblue.org

[tech-chan]

I already have all of that, and on the cad file, the layers are locked so that you can't invert them.

[Chronobreak]

http://haveblue.org/tech/automag/index.html

was going off what they have posted. may want to double check, but im not too familiar with cad programs myself

[tech-chan]

all i need know is the cad file of a rail.

[Bad_Dog]

is anyone aware of any SolidWorks drawings of any Mag gear? posibly ProE drawings?

[secretweaponevan]

...does anyone have the CAD file for the micromag body? And the threads for foregrips/air tanks? Pm me if you have one of these or all of them and I will give you my email.
-Jeremiah

http://haveblue.org/tech/asa/index.html is what I use to set up blanks for single-pointing on a lathe.

As for the Micromag body, that is probably closely guarded by PTP and anything that you find will probably be taken from measurements by an owner and subject to error (remember the clones from ~1995).

[tech-chan]

THank you for the file, now all I need is the cad file for the rail.

[doc_Zox]

the rail is in there...

I installed Adobe's newer dwg reader for Adobe Illustrator an opened the sluggo file. http://haveblue.org/tech/automag/almb-6x.dwg

Updated DFX/DWG plug-in for Adobe Illustrator CS3

http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402977

This updated plug-in creates layers in Illustrator CS3 that correspond to the layers in the DFX or DWG file and imports the objects in the corresponding layer. However, because of differences in the way layers are treated in Illustrator and AutoCAD, object stacking order may change after importing a DFX or DWG file with this plug-in.

Install this optional plug-in only if you want to maintain the layer hierarchy while opening a DXFor DWG file in Illustrator CS3


woomp there it is!

[Tracy_ptp]

As for the Micromag body, that is probably closely guarded by PTP and anything that you find will probably be taken from measurements by an owner and subject to error (remember the clones from ~1995).

Yes, you are right. But if someone needs help with something we try and help without giving away our secrets.

[tech-chan]

Wow. Sorry, this thread is a little old.

I got my stuff down long ago and have the majority of DWG files for everything(got bored in cad class). Not quite ready to release them to the general public... Im almost done.

[DanMan]

I have some reverse engineered mag parts and a really nice intelli frame in NX3 that I created for a college project. Not all the models are well done as we were on a time crunch and I was working in a group. If anyone wants them send me a PM and i can email them to you.