I think I just snagged a good deal

[Chaos_Theory!]

Thats really not a great deal but its pretty good depending on the kits.

[t0nnn]

punkcat I should have mentioned.....it's a pump lolll

[punkncat]

punkcat I should have mentioned.....it's a pump lolll

Geez man......ok, so if you pump the marker then it will stop leaking right?

A lot of times on a cocker (or an LP JABB for that matter) when the hammer is forward it will cause a leak, especially when running low pressure and sprung for it.
Consider that the moment it fires the pneumatics (on a semi) return the backblock and cock it again for the next shot. The hammer will not be resting on the valve stem for longer than a few milliseconds and you don't hear that leak.

If you are not pumping it right away, which I wouldn't know why....you will either have to increase the pressure to compensate for the mainspring sitting on the stem, or the valve spring to balance against the main spring. This may run you into problems gaining enough dwell to actually get velocity.

[phatty123]

totally hi-jacked this kids thread lol...

The valve isn't resetting properly, after every shot i'll get the constant internal leak. All I have to do is tap the cocking rod back and the valve seals. I'm gonna mess with it more tomorrow, it was suggested to try and up in the input pressure which is at 300 right now, switch to a maddman light main spring, or cut the main spring shorter. I'm using a heavy maddman valve spring and a medium maddman main spring

Well it doesn't matter if you guys Hi jacked my thread. As for being a kid.... not so much. And for the comment after that. I didn't think I needed a pciture to make it a thread.

-barry

http://i64.photobucket.com/albums/h166/dubsman35/P1010200.jpg

http://i64.photobucket.com/albums/h166/dubsman35/P1010199.jpg

http://i64.photobucket.com/albums/h166/dubsman35/P1010196.jpg

http://i64.photobucket.com/albums/h166/dubsman35/P1010195.jpg

This are the sellers pics and dont show the hopper. I will provide my own pictures when everything arrives.

[ProblemKinder]

Well it doesn't matter if you guys Hi jacked my thread. As for being a kid.... not so much. And for the comment after that. I didn't think I needed a pciture to make it a thread.

-barry

http://i64.photobucket.com/albums/h166/dubsman35/P1010200.jpg

http://i64.photobucket.com/albums/h166/dubsman35/P1010199.jpg

http://i64.photobucket.com/albums/h166/dubsman35/P1010196.jpg

http://i64.photobucket.com/albums/h166/dubsman35/P1010195.jpg

This are the sellers pics and dont show the hopper. I will provide my own pictures when everything arrives.

now you know.

[t0nnn]

Well it doesn't matter if you guys Hi jacked my thread. As for being a kid.... not so much. And for the comment after that. I didn't think I needed a pciture to make it a thread.

-barry

http://i64.photobucket.com/albums/h166/dubsman35/P1010200.jpg

http://i64.photobucket.com/albums/h166/dubsman35/P1010199.jpg

http://i64.photobucket.com/albums/h166/dubsman35/P1010196.jpg

http://i64.photobucket.com/albums/h166/dubsman35/P1010195.jpg

This are the sellers pics and dont show the hopper. I will provide my own pictures when everything arrives.

my bad, totally hi-jacked this mans* thread
he's got the original hinge frame on there with the WGP logo printed on there instead of a jewel, I have that one too. Even tho it's nothing, I still feel special for buying one when the first batch came out

[Ruler_Mark]

the fade barrel kit is a 3a off of ebay, dunno on the quality but they are from china.

the other looks to be a odessy kit for when they made the mech cockers. both kits arent worth very much

[phatty123]

I understand that the barrel kits arent top notch, but for 81 dollars its not bad.

-barry

[phatty123]

updated