A sneak peak at my new BEAST.. BIG thanks to rb211

[BREAD_DA_PAINTER]

This is my EP mag that is being completed by rb211. . It has the new V2 airwalk frame, Palmers stab, and has the goodies put in a total sleeper form.. We came up with some good sleeper ideas.. I will get more indept about the project when i send it off for anno and get her back... And now for the the pics..


In the sleeper form





where is the trigger pin?? Also can see the on/off switch in this pic



He came up with the idea to mount the micro switch in where the saftey usually catches the back of the trigger. If you look into the hole where the saftey usually is you can see the black micro switch and the set screws above the same hole... Since it has a on/off switch there was no need for the saftey anymore.. Trigger doesnt have both set screws in it or is that one set, these are just pics i wanted to post to show my fellow maggers what i had in store for my EP..

Here is a pic of inside the rail.. Can see the top of the on/off switch.. also see how we drilled and tapped the top of the asa to get the air line inside the rail.



This BEAST has a 25g switch inside her so it has the exact pull as a electro. .

When i get it back from anno i will put a video of me shooting her....

[Steelrat]

Looks good. However, that stab looks goofy on there. I'd think a 2-liter without an extension would look much, much better. If you're going all out, you might as well go ALL OUT.

[BREAD_DA_PAINTER]

Looks good. However, that stab looks goofy on there. I'd think a 2-liter without an extension would look much, much better. If you're going all out, you might as well go ALL OUT.

it will be annoed to the polished clear also.... i was looking at a fatty also....

[Ruler_Mark]

you know what would ahve been better mounting the microswitch so it ran off of the trigger safety. for added sleeper.

[BREAD_DA_PAINTER]

you know what would ahve been better mounting the microswitch so it ran off of the trigger safety. for added sleeper.

that is where she is... the 2 set screws above where the saftey switch usually is is holding the micro in place....

[dyeforever]

how light is the trigger pull? im using a stock ion trigger switch and the pull is so light the if I turn the gun up the switch cant return the trigger.

[Steelrat]

it will be annoed to the polished clear also.... i was looking at a fatty also....

It's not the shape, it's the length. It looks too long for the gun.

[Ruler_Mark]

that is where she is... the 2 set screws above where the saftey switch usually is is holding the micro in place....

whats with the micro just behgind the foregrip then?

[BREAD_DA_PAINTER]

how light is the trigger pull? im using a stock ion trigger switch and the pull is so light the if I turn the gun up the switch cant return the trigger.

the v2 airwalk has the magnet to reset the trigger so i have no issues with the trigger resetting... the micro switch is 25g..

[dyeforever]

for some reason mine doesnt work. i think the magnet is to high.

[Steelrat]

I'm hoping the trigger on those frames didn't sacrifice functionality for aesthetics.

[BREAD_DA_PAINTER]

for some reason mine doesnt work. i think the magnet is to high.

do you have the trigger set screw in? that is what the magnet pulls back into place.

[BREAD_DA_PAINTER]

whats with the micro just behgind the foregrip then?

Thats the on/off switch for the board..

[olinar]

where does the magnet mount on the frame?

Call me dumb but i couldnt find a spot mount it.


+1 on the foregrip being too long. Maybe if it was flipped the other direction...

It does however look awesome, Pretty much what i was plannig on doing with mine but in dust black.

[Shane-O-Mac]

The reg set-up looks odd. You realize that your feeding the Stab backwards? The extra piece you have in there is like a gauge adaptor, and you asa has an extra port on it for the same thing, you can get rid of some of the length. Heres how I would do it, run the T fitting into the input of the Stab, and run the bottom line to the grip asa or tank and the top line to the valve. Then use the gauge port on the reg or silver asa for a port for the LPR air from the stab.