well i could never find a drop forward that would give me the feel i was looking for and would fit an 88ci so yesterday i made one and its not to bad for my first try.

a 1/4"x1/4" steel rod and a CP mini on/off.








so what i did was clamp the rod in a vise and heat up the part i was going to bend so i wouldnt snap it.
then i used a cut off wheel to make the groves for the on/off to slide on.
then i drilled out the holes above the on/off and taped them to 8-32 so i could used 2 set screws to keep the on/off from slidding.
then drill out the hole to mount it to the gun.
i just need to paint it gloss black to match.

a 1/4"x1/4" steel rod and a CP mini on/off.








so what i did was clamp the rod in a vise and heat up the part i was going to bend so i wouldnt snap it.
then i used a cut off wheel to make the groves for the on/off to slide on.
then i drilled out the holes above the on/off and taped them to 8-32 so i could used 2 set screws to keep the on/off from slidding.
then drill out the hole to mount it to the gun.
i just need to paint it gloss black to match.











Now I see it... You just hold the gun differently, pressing the tank against your chest... Not so bad in fact but I wouldn't be able to play speedball (which is what I play mostly here).
Comment