Opinions on some paint

[cyrus-the-virus]

Yes everything for the level 10 is installed correctly. The only other option is that my reg piston is a very old version that can't handle the higher operating pressure when using the level 10. The level 10 is apparently not 100% drop in for older rt/classic/retro valves... But it still performs pretty well with the gold spring.


On a side note I picked up the 25 buck case of rps flash. The balls are dark/light grey and seem very tough. Thats good. None of them have dimples they are all perfectly round and are about .689 cal. I think they will shoot great. If so it will be my new choice paint.

-barry

You have to get a larger sized thingymajob(brass ring inside the power tube, affects airflow) to run the red or silver spring.

Sounds good! I like nelson and X-ball over RPS, but good luck!

[phatty123]

You mean carrier? I have the perfect one in there along with the perfect amount of shims... It is not a carrier size issue..

[drg]

Fresh low-end paint can be better than old high-end paint, and with the price ... get the flash and see how it shoots fresh.

[cyrus-the-virus]

You mean carrier? I have the perfect one in there along with the perfect amount of shims... It is not a carrier size issue..

you may have to change if you use a stronger spring.

[phatty123]

no..the carrier is not the issue and wouldnt be in this situation. the carrier is just for the fit of the oring on the bolt. It is not responsible for not being able to use the read spring. Trust me.


.barry

[Enemy]

i used to love the flash it is a great paint.. i used the green which had a kinda 2 stage green fill.. also used the x-ball bronze liked it well too but the flash has been a nice favorite..


on a little side note, marbilizer is around the perfect size for a stainless steel minimag barrel, shots just as straight as any custom barrel.