Hey

[Justice_Guy]

Hey I'm New To The Site And I Just Got A Mag Love It! And I Just Had One Question
I Have The Slide Part For Making A Quick On/Off But Where Can I Find The Other Part To It
That Screws Into The ASA?

[questionful]

Congratulations On The Automag, And Welcome To AO! I Find The Rest Of Your Post Quite Vague, Could You Explain More? What Do You Mean By "Quick On/Off"? And Many Things Screw Into ASA's, Which Thing Do You Mean? And What Is "The Slide Part"?

[SummaryJudgement]

1/8 npt fitting:
http://www.actionvillage.com/is-bin/...AAD8%2eZ_HR1xz

Complete kit: http://www.actionvillage.com/is-bin/...s-bottom-lines

Individual fitting:
http://www.actionvillage.com/is-bin/...wAAAD4hKzkrFs5

Expansion chambers:
http://www.actionvillage.com/is-bin/...nsion-chambers

Gas-thru grips:

If you are running CO2, you should get an expansion chamber. If you are running compressed air, never regulate an automag, a gas-thru foregrip is fine.

I'm only using paintballgear.com as an example, you should be able to find this stuff nearly everywhere.

Hope you enjoy your mag

[punkncat]

I think he is talking about a slide check.

If you have the actual slide part then the other end is just an air nipple.

I am guessing that you are talking about the piece on the end of a remote. If not can you please be a bit more clear or show us a picture, etc?

[questionful]

Oh I think he means a qick disconnect. You can find QD nipples almost anywhere, including over in the Buy/Sell/Trade section of the forum, check it out.

[Justice_Guy]

here is the part i have

[questionful]

FYI I'm pretty sure you can run that straight into your valve instead of your ASA, just put the nipple on a 90* elbow straight out of your valve like this:

http://i194.photobucket.com/albums/z304/Qful/PC160172.jpg?t=1211929441

That is, if that thing takes nipples. I've never seen a slide check in person. Do they disconnect like a QD or do they just vent the air in front of them? Or the air in the airline?

[punkncat]

Yeah man, just put that inline before your QD and you are set to go. This is normally used on a remote line for ease disconnecting without having to unscrew the bottle.

[Justice_Guy]

the part i need is screwed into that asa of this guys gun

http://img233.imageshack.us/img233/6738/automag010kv4.jpg

[questionful]

http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=40&products_id=182

I might be able to take mine back from a friend who isn't using it and sell it to you for a bit less if you want. You could probably find some floating around the B/S/T, too.

[pk5]

So you have a slide check, that is only for turning on/off the air to the valve or if you are using a remote line, on/off the air to the remote line.

Assuming you already have the asa, you don't really need that asa to hose adapter, the thing in the picture is a bottom line kit (duckbill included)

To make it easier, on your self, get a gas through foregrip:

like these: http://www.actionvillage.com/is-bin/...ems-fore-grips


or what you are looking at on that page is actually just the bottom line kit:

http://www.actionvillage.com/is-bin/...s-bottom-lines

sorry i haven't seen one since my spyder day so it took a while to recall what it was:

They will end up costing you the same, even though if you search on pbnation.com for a bottom line parts out, someone will likely to sell them for cheap, since they haven't been "in styles" for a while now.

Either a gas through foregrip or a bottomline kit will work for you, just don't get a regulator

[Justice_Guy]

Thanks For The Info

[Chronobreak]

welcome to the cult