I'm not complaining or anything about my Intelli..i love it to death..but i was just wondering..my trigger seems to be rubbing up against the the actual frame body..right about the point where the trigger starts to round into the straight part of the trigger..and it seems to be stripping the black anno off of the frame itself (from the trigger action of course)..and also up at the top of the trigger near the screw (because the frame is the only thing stopping the trigger from swinging any farther forward)..i was just wondering if that was normal or a tolerances issue or whatever...i mean..i can live with if it's normal..just wondering..
-
here's the other part of the trigger... -
Yes that is perfectly normal. The frame is used for the forward trigger stop. If it's digging into the frame you might not have the trigger rod adjusted right.
AGDsigpicComment
-
i've never touched the trigger rod...it's the stock one from my retro valve ...so i'm not very mechanically inclined so i tend not to mess with things i don't know much about..Comment
Comment