Hyperframe Question

[wetwrks]

Ok, what work has to be done on a Hyperframe to make it work on a mag?

[Sumthinwicked]

nothing at all actually the well you take the pin off the sear at the rocking point be carefull use 2 pair of needlenose pliers and save the rod for later reuse then put on frame

[wetwrks]

Sweet. Now hopefully it was described correctly and works properly:

http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN:IT&ih=012

[Sumthinwicked]

thats for a spyder and i dont know how it can be modded noice the part sticking up thats not on a reg mag one and the front mount is wrong mag ones end a tthe triggerguard

[michbich]

Yup, spyder frame. The sear isn't correct for a mag.