Who told you a Mag is heavy?

[Dirge]

Ah! The places where the screws were are milled off. Then new ones added.

Am I even close?

[mpsd]

Ah! The places where the screws were are milled off. Then new ones added.

Am I even close?

That's it!

[FiXeL]

Nice one, MPSD! But heavy? People that complain about mags being heavy should get a VM-68. That should stop them complaining, or get them to work out more often.

[flyingpootang]

I thought all you Brazilian guys used triple beam scales Very nice UMF'd Karta. That is defiantly a rare marker....

[MANN]

what grips fit it? I have a few umfs that I have removed the holes for as well. dm grips are too big (tall)

[going_home]

what grips fit it? I have a few umfs that I have removed the holes for as well. dm grips are too big (tall)

http://cgi.ebay.com/DYE-STICKY-III-G...3286.m14.l1318

DM4 and 5 grips. Remember the Logic EM Ripper is a 2005 project.
But yeah the Ripper frame is a bit taller than the UMF so the grips will need some trimming at the top.

[MANN]

http://cgi.ebay.com/DYE-STICKY-III-G...3286.m14.l1318

DM4 and 5 grips. Remember the Logic EM Ripper is a 2005 project.
But yeah the Ripper frame is a bit taller than the UMF so the grips will need some trimming at the top.

unfortunately that is what I purchased, and thought would work. It has to bet trimmed ALOT. I looked at a few spyder grips that looked like they were smaller, but wasnt sure.

[p8ntbal4me]

I have had several UMF's and thats NOT a UMF .
A UMF takes standard grips with 4 screws.
That takes grips with 6 screws, its definitely an EM Ripper frame.

http://www.logicpaintball.com/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=LP&Product_Code=UEMFV10

Just wondering how you got your hands on it.
The grip screws on a UMF are actually in the way to make a pneumag frame .

http://www.airsoldier.com:8080/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=AOS&Product_Code=LOGIC-UMF-MAGFRAME&Category_Code=CLOSEOUT

EDIT: Unless someone modified the UMF to take the other grips.

Here is my stock UMF that was when I did the EP conversion to it (on the left). Sitting next to it (on the right) is my Logic EM Ripper frame as it came in the mail. It is now complete with board and setup,... I just have to get the rest of the parts to anno.

The grip frame screws arent in the way to make a Pneumag,.. they are in the way to make an E-Noid conversion like Pnemagger did shown in the first post above. In the thread where he showed his work off,.. I asked him what kind of grips he decided to go with,.. think its in the PB Talk section GH,......

~ P8nt

[p8ntbal4me]

unfortunately that is what I purchased, and thought would work. It has to bet trimmed ALOT. I looked at a few spyder grips that looked like they were smaller, but wasnt sure.

Take a look at the Angel LCD grips.

I was trying to get a set and do the layout over my UMF.

Pretty sure Im going to be using some form of EGO grips on the next project.

~ P8nt

[mpsd]

Take a look at the Angel LCD grips.

I was trying to get a set and do the layout over my UMF.

Pretty sure Im going to be using some form of EGO grips on the next project.

~ P8nt

This frame will use ETEK Ego grips modded on the botom to accept a bolt on the back. That's what Joe used when he drilled the holes. I already bought one set that's in the mail right now.