Would it be possible to make a pump Mag that the user can switch between pump and Semi?
Now here is an idea: A Pump Mag that functions like a SPAS 12
Collapse
X
-
Tags: None
-
Originally posted by MAGslingerWould it be possible to make a pump Mag that the user can switch between pump and Semi?
Sure.
The easiest way would be to have 2 valves and just remember to keep the pump forward when shooting.
If you can't have 2 valves then all you need to do is pull out the wave spring when switching from pump to semi. -
I'm talking about actually building a pump mag that has this stuff built in. My idea is that the part of the pump rod that connects to the bolt, would have a clevis built into it. There would be another rod, running horizontally across the pump rod. This rod would act as a 'selector' switch. Basically, when you pushed the rod running horizontally across downward, the pump would be disengaged and the gun would shoot semi, push it back up and it would engage back into pump mode.Comment
-
i would think remove the wave spring so the bolt can reset fully and dont pump the Handle and you should be good to go in SemiComment
-
-
-
Comment




Comment