New Tac-one

[Dorian Feyd]

What or who is WWA? Thanks: Feyd.............

[Pullman]

http://www.whitewolfairsmithing.com/

White Wolf Airsmithing

[Dorian Feyd]

All they had was Phantom and Sniper parts. But I was wonering where to get that Freak front with the cool porting! I was thinking of welding up my own Sydarm out of a classic 68. Thanks: Feyd.......

[Looper]

OK got home and put in the shim. It leaked down the barrel. Took it apart made sure all was good, reassembled it. It still leaked. Took it out and no leak. I have read about this so I was not surprised. I'll keep working on it. Thanks Feyd.....

You might have to go down a size on your carrier (4) to stop the leak, but keep the same O-Ring (2) as it wears in after awhile and that is a good thing.

[Dorian Feyd]

So if I down size the carrier what will that do to velocity? I have found with this gun you change one thing you need to change others as well. I'll give it a shot after this week end I have a big scenario in Conn at Strategy Plus and it works fine I don't want to mess it up: Feyd.............

[michbich]

So if I down size the carrier what will that do to velocity? I have found with this gun you change one thing you need to change others as well. I'll give it a shot after this week end I have a big scenario in Conn at Strategy Plus and it works fine I don't want to mess it up: Feyd.............

Won't change the velocity.

[Dorian Feyd]

What will that change then? Feyd....

[Looper]

What will that change then? Feyd....

The smaller the carrier the tighter the o-ring will pinch/seal against the level 10 bolts inner shaft, thus stopping the leak down your barrel.

Carriers are marked with a dot and a ring... dots are half size and rings are whole sizes. So if you are currently using a #2 size carrier (two rings) look for a carrier that is a #1.5 (one dot and one ring). Use the same o-ring, because it is broken in, and this should fix your leak issue.

[Dorian Feyd]

Thanks I'll give it a shot. Feyd..........

[Dorian Feyd]

I need to resurrect this thread. I have taken the valve apart and the carrier has nothing on it. Other than the black O ring. It came with three new ones; one matches the one already in the valve. The other two though, one has a line and dot and the second has just a line. So what I'm wondering is which has the next step from the stock one? Today with small paint I had to tighten the velocity adjuster up and I got the leak down the barrel again. So I want to tighten the O ring up with a tighter carrier. Any help would be great and thanks: Feyd.........

[snoopay700]

About the shot on air-up, that'S normal.

I haven't experienced that since i first got my RT, it only happens if the sear rod is against the trigger when you air up, if you pull the trigger then put the safety on and air it up it should air up without firing a shot.

Oh, and i can only recommend a Pneumag if you put a magnet mod onto it, otherwise the trigger isn't all that great in my opinion.

[Dorian Feyd]

On the one shot thing I figured it out by accident that if the safety was on it would not shoot the one shot on air up. I took one of the spacers out of the ULT and the leak down the barrel stopped. But I was wondering if the cold and just O rings breaking in were my main problems yesterday. I still need to figure out these carriers. Thanks for the advice on the pnemo trigger. I am hoping to meet a guy at a feild so I can try one out before I do it. Feyd....

[snoopay700]

On the one shot thing I figured it out by accident that if the safety was on it would not shoot the one shot on air up. I took one of the spacers out of the ULT and the leak down the barrel stopped. But I was wondering if the cold and just O rings breaking in were my main problems yesterday. I still need to figure out these carriers. Thanks for the advice on the pnemo trigger. I am hoping to meet a guy at a feild so I can try one out before I do it. Feyd....

No problem, i love mine but i also shoot a lot more paint now simply because i can, but it is one of the nicest triggers i've felt, although it's also a BKO frame. Pretty much only do it if you don't think you fire fast enough.

[Dorian Feyd]

I do play speedball and I do like to walk the trigger. I want to make it as close as It can be. So it will be a winter project. I think it would be fun to play at Boston paintball with it just to shake things up! Feyd...........