mag pistol

[pnzrkity]

I'm thinking of converting a mag into a pistol. Are there any plans for this or can someone help a brother out.
Cheers

[secretweaponevan]

12 gram side-lined and minimag barrel or go for a sydarm.

[robertsr1811]

I've done one, and I'm working on another.

If you want to holster it, you need to think ahead. I went with a horizontal bucket changer under the barrel. I really like this configuration as it makes the lines of the gun really clean.



I went with hardline on this one, and devolumized the hardline with a heavy gauge wire so there was a minimum of space for expansion from 12 gram to valve. You can set up your 12 gram changer to run sidesaddle straight off the valve to do the same thing, but it makes the balance of the gun a bit wonky.



I chose a spring-feed magazine for mine, and attached it with industrial epoxy, and then DuraCoated the whole shebang.

I got about 20 slow shots to the 12 gram off it, or 10 rapid fire shots. I've heard of people further tweaking for more shots, but it took an additional regulator, and I didn't want more hanging off the gun.

Hope that helps! If you have any questions I'll be happy to answer them.

[Bagheera]

I designed this pistol to work with spring fed tubes. Right now I'm using 2 springs inside of tubes, but soon I hope to purchase some from Noxx and do this spring tube thing right. In essence, this one is mag fed, and you can fire it as fast as you can pull the trigger, no rocking necessary when the spring tubes are involved.

Best of all, it's still holster-able! This is thanks to the holster I bought from Noxx.

[ChaosPhoenix]

I did one earlier this year for kicks and giggles. Ended up selling it back to the guy I bought the mag from (after I converted it to a pistol) because I got laid off, but here's some pics of it before I sold it.

[pnzrkity]

thanks guys