Need help identifing a paintball part

[MANN]

I bought out a paintball supplier a few years ago, and ended up with this part. I have always wondered what it went to. I sorta figured it was someones take at a custom marker.

It has what looks to be a bottom feed option as well as a right feed option. (there are holes for both). The back of the black tube is .690 and the front is .845ish. I would guess that they had intents on threading it. Although it would have to be long threads.

It uses some type of hammer valve (too big to be a spyder or Brass Eagle parts.)

I wanted to figure out what it was before throwing it back in the bottom of my "useless paintball parts box"

[GRimm]

Looks like a custom part to me, then again I could be wrong. Hopefully if it isnt custom someone will recognize it.

[Watcher]

The top part looks like an autococker valve and hammer, can't tell fom the pic it's size though.

Can you snap it by something for comparison?

[MANN]

the outside diameter of the valve is .745 does that help?

[Watcher]

the outside diameter of the valve is .745 does that help?

Hmm, so like 3/4 of an inch.

Yeah, I'm willing to bet that it is a 'cocker valve.

[Coralis]

its also similar to vm68 valve

[Watcher]

its also similar to vm68 valve

Actually, I just clicked the pic to blow it up and it would appear NOT to be a 'cocker valve.
If it was, it would be threaded on one end and it would have a hex-nut shape on the other.

It is a bit hard to tell from the pic, but a standard poppet valve could be from almost anything.


The other part appears to be milling practice, have at it

[punkncat]

Not a cocker valve. The "front" oring on a cocker valve does not have the lip on the front side. It already has a shoulder inside the marker to sit on.

Without being able to see the back side of it, I would say it was a valve to some manner of JABB.

[MANN]

A guy on mcb shed some light on it. He stated it was a MKX8

http://www.bp-usa.com/mkx8.htm

Anyone need parts to one?

[Watcher]

I thought those were made by SP?

Weird parts anyways...

[JesseB]

nevermind those thumbnail size images are misleading. I don't know what the heck those are.

[Dend78]

how many years ago did you buy them out? reason i ask those just came out a not to many years ago, and yes SP makes the SP8 which looks basically the same as those