how do i install a foamie (superbolt)

[PaInTbALL zAcH]

i gota superbolt and i got a fomie and i wanna make a foamie super bolt. HOW?

[Predater]

didnt the superbolt already have one glued on when you got it in the mail. Or is yours from the first batch.

[PaInTbALL zAcH]

i ordered it the day they came out

[PaInTbALL zAcH]

n e one?

[talls]

Were the first superbolts made for foamies? If it was when you put the foamie in the tip of the superbolt it should be flat. I just use superglue when I put the foamies on so that should work fine. Post if you have anymore questions

[Rock Star]

yea i need to know where to get foamies i already have superbolt.

[talls]

Hey Rockstar you can by them straight from AGD. But if you want I have an extra one so you can use it until the new ones come in. If you are going to order them, buy a couple boxes and I will pay you back so the shipping won't cost as much.

[ben_JD]

Well, the Superbolt you have probably isn't going to take a foamie very easily. If your Superbolt has a delrin, concave face, then it is the first generation of superbolts to make it to retail and you will have to shave down a foamie (which you can buy from AGD's online store or find in an old parts kit) to fit inside that concavity. Once you have a foamie which fits nicely into the concavity and isn't sticking any out further than the lip of the bolt, you can clean both surfaces well with iso-alcohol and superglue the foamie to the bolt (being certain that you don't block the three air passages). Let the bolt sit overnight to cure. Try not to dry-fire too much, since that seems to really test the foamie's grip on the delrin.

The other solution is to call AGD's tech line and get an RA number for the bolt and get it upgraded for you. They will upgrade your Superbolt and attach a foamie for you. Also, the upgraded Superbolt will take a full-sized replacement foamie in the future, so you don't have to shave one down.

Good luck.

[Rock Star]

Thanks guys.