PTP powerfeed

[cockerpunk]

im looking for a PTP powerfeed bolt on setup. i have looked on PTPs site but didn't see anything.

anyone know if there are any extras floating around?

[theGOLDENchild]

I read this is the same thing. http://www.proteamdirect.com/warfeedad.html

[cockerpunk]

no that is an adapter to put a warp feed hose on a normal feedneck.

im looking for the power feed bolt on system.

[Frizzle Fry]

no that is an adapter to put a warp feed hose on a normal feedneck.

im looking for the power feed bolt on system.

Which? The dovetail one with one (or two) bolts for a Micromag? Or the ones on the cockers that had a wing on either side? Or the one for VMs, and then the one for M98s, and then there was even one that attached to any side feedneck.

Either way, they have in stock Micromag feeds, M98 feeds, and I believe standard feeds.

[xero28]

Send a PM to Tracy_ptp (just go to the MicroMag 2009 thread to find her), she should be able to hook you up if they have them in stock.

[cockerpunk]

its for the PTP cockers. so it has those little flanges on the sides with screw holes.

[theGOLDENchild]

no that is an adapter to put a warp feed hose on a normal feedneck.

im looking for the power feed bolt on system.

Spin it around 180* and replace "warp" with "power" and you'll have a clamp on pf adapter for use on standard feed systems

[cockerpunk]

Spin it around 180* and replace "warp" with "power" and you'll have a clamp on pf adapter for use on standard feed systems

the feed im talking about screws onto the body. the PTP cockers all had removable feed.

[Frizzle Fry]

the feed im talking about screws onto the body. the PTP cockers all had removable feed.

I'm fairly sure they don't have any in stock. I have 2 in "Cool Camo", one mostly green and the other mostly Blue(ish) but it would take something seriously interesting to get me to part with eithe. I'd check with Tracy, but if you can't get one shoot me a PM and we'll talk.

[BigEvil]

Uh, did you PM Tracy?