barrel bore for freak

[riceboi]

i just pick up a Phantom want to bore the stock barrel, who good person go to?

[sunshaker]

i just pick up a Phantom want to bore the stock barrel, who good person go to?

Well you have a few choices, these are the ones I'd recommend, but there are a few others out there that do it.

http://www.desertduckdd68.com/4436.html

http://www.odells-paintball.com/

(Hi everyone. First post here, I guess I'm done Lurking.)

[Schmitti]

Just an fyi.. boring a phantom barrel for freak inserts makes the area near the threads very thin. If you are not careful the barrel can flex, bend and even break. Just a little FYI and warning. That being said, there are more than a few phantom bored barrels out there that have not broken yet. But if you get it done.. be careful with your barrel.

E

[gunman_2000]

Just an fyi.. boring a phantom barrel for freak inserts makes the area near the threads very thin. If you are not careful the barrel can flex, bend and even break. Just a little FYI and warning. That being said, there are more than a few phantom bored barrels out there that have not broken yet. But if you get it done.. be careful with your barrel.

E

I had mine done by O'Dells a few years ago. Probably going on 3-4 years maybe (honestly can't remember now). But I've had no problems. It has definitely made playing with my phantom much more enjoyable.

[Piranti]

I had several Barrels that were bored for Freak Inserts for a Phantom I had. I was not gentle with my marker when playing and never had a problem with the barrels breaking or bending. My favorite ones were WWA Barrels that looked like the Justice barrels but for the Phantom.

[riceboi]

thx for the info guys, look like it going be around $40 to do it