My very own "Christmas In November"

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • xero28
    Registered Useless
    • Mar 2008
    • 1102
    #1

    My very own "Christmas In November"

    So over the past two weeks I've traded three cockers for 3 Mags, brining the total number of Mags to 5. Got a long way to beat A-Tach and Loguzzzz (and many others of you).

    Everything worked out right and all three of these arrived today!



    Classic with AA Splash barrel, reverse MiniMag valve (first reverse I've owned):



    ULE'd, Intelli'd classic (MiniMag valve again)



    My favorite one of the bunch...Classic RT goodness. Level 10, new CF frame. Picked up the asa/bracket from another AOer, gas-thru was originally on the ULE'd. Boomstick and J&J barrels. Also came with the Hyperflow 201 reg that I put on an extra tank. Cranked her up to around 1100 psi...Riiiipppppssss Now I just need to find a new cradle for the reg.



    Anyone know where I can get a new cradle? The one on there works, but it covers the fill nipple and I have to take the whole thing off to refill. Looking for one that looks like this:
    Tags: None
    • pump
      Registered User
      • Jun 2003
      • 750
      #2
      what cockers did you trade?

        Comment

        • Rudz
          Registered User

          • Apr 2005
          • 5087
          #3
          Is there a way to mill the cradle so the fill nipple is accessable?
          BEO MAFIA
          sigpic

            Comment

            • xero28
              Registered Useless
              • Mar 2008
              • 1102
              #4
              Originally posted by pump
              what cockers did you trade?
              Traded a Hook-ups for the RT, Orry for the ULE, and a 1/2 Block project gun for the Classic.

              Originally posted by Rudz
              Is there a way to mill the cradle so the fill nipple is accessable?
              I don't think so. You would have to cut off part of the mounting bar and then the bracket that goes around the reg is flush up against the nipple, I'm not sure how it could be milled.

                Comment

                • FutureMagOwner
                  Registered User
                  • Dec 2001
                  • 3354
                  #5
                  When I had that hyperflow mounted on the RT (which was about a day before I picked up a ninja reg to replace it) i had the gauge facing down so the fill nipple was to the right, plus if you throw on those new micro gauges they got out now you could probably reposition it a bit better.

                  I don't know about getting new cradles though, since adjustable regs have kinda gone the way of the dodo.

                    Comment

                    • xero28
                      Registered Useless
                      • Mar 2008
                      • 1102
                      #6
                      Originally posted by FutureMagOwner
                      When I had that hyperflow mounted on the RT (which was about a day before I picked up a ninja reg to replace it) i had the gauge facing down so the fill nipple was to the right, plus if you throw on those new micro gauges they got out now you could probably reposition it a bit better.

                      I don't know about getting new cradles though, since adjustable regs have kinda gone the way of the dodo.
                      Yeah, I put the Micro Gauge back on there and turned it so the larger gauge is facing down. The cradle isn't 100% around the reg, but it feels sturdy enough and I think it should work just fine. Thanks again for everything. Can't wait to run some paint through this puppy.

                        Comment

                        Previous template Next
                        Working...