AGD Detents vs Kila

[Shirow]

Are the Kila detents really worth 3x as much as the AGD ones? How often do you have to replace them?

My ULE body came with a Kila detent already in it but I want to replace it with a black one as it doesn't match right now so curious if it's worth spending all the extra $ on the Kila detents.

[tbaggin]

IMHO, they are very pricey at nearly 30 each. I use CP detents, they look sleek and clean and are ALOT cheaper and work the same.

[Shirow]

IMHO, they are very pricey at nearly 30 each. I use CP detents, they look sleek and clean and are ALOT cheaper and work the same.

Where can you buy those online?

[WickedKlown2]

CP Detents : http://store.customproducts.us/index...3&categoryID=0

Hope that helps

WK2

[MANN]

killa and rpg detents are rebuildable/cleanable. IMO that is worth the extra cost of either.

[Shirow]

killa and rpg detents are rebuildable/cleanable. IMO that is worth the extra cost of either.

Well, that was why I asked - how long should you expect a detent to last? If it's only a couple of months, being rebuildable is nice.. if it's a couple of years, it's not quite such a big deal.

[longi]

My Kila detents fell to bits after the second outing, my AGD detents are still hanging in there after seven years! I won't be buying the Kila detents again.

[BigEvil]

My Kila detents fell to bits after the second outing, my AGD detents are still hanging in there after seven years! I won't be buying the Kila detents again.

I bought a bunch of Kila's a while back to 'upgrade' all of the detents in my mags. Big and costly mistake. Kila's do not like mags one bit and tend to break very easily in them. Although you will occationally break any detent, the AGD ones hold up very well for the money.

[Shirow]

Thanks for the input everyone, I think I'm going to go with the AGD detents based on this.. considering I can get close to 10 for the cost of 2 Kila's..

Now if only they came in matte black

[Hexis]

My 1st gen Killa was not so great, but my 2nd gen Killa has been great. I'm a pretty light user tho.

[Spazmok]

I as well have had a horrible time with 1st gen kila's. It was enough that I personally won't use their products again. I havn't tried their newer ones, but for the price and my past experience I can't justify chancing it again.

[tbaggin]

most my mags have their orig AGD detents and work just fine, and im a medium-moderate player. usually twice a month.

The way yer gonna go i think is the best economical decision.

[TwilightG]

Now if only they came in matte black

The two detents I bought a few months back are somewhat matte-black. They're not glossy like they use to be (same with the ULE bodies and Intelliframes)

[Shirow]

The two detents I bought a few months back are somewhat matte-black. They're not glossy like they use to be (same with the ULE bodies and Intelliframes)

Well, I just bought a couple from Tuna, guess I'll see what I get and cross my fingers

[chafnerjr]

We (AO) had a discussion about this a few months back. No one EVER seems to have problems with the AGD detents. I really wanted to get some killa's but after talking with everyone here ad nauseum everyone seemed to agree that the AGD detents are about the BEST you can use on a mag. Everything else seems to be a bunch of hassle... for those that complain about them being too stiff and breaking paint I only point to your lvl10... detents won't break your paint, your bolt will.