Evolution Grips

[Carnage reigns]

I want all three

[Wrathbringer]

So will V-1 and V-2 either have a channel cut in the back to reduce weight, or a solid back with a hole drilled through the middle to accommodate the air-thru? Will the air-thru then not be as adjustable as the standard?

Either way put me down for a V-1 no air-thru!

[Mongoose]

So will V-1 and V-2 either have a channel cut in the back to reduce weight, or a solid back with a hole drilled through the middle to accommodate the air-thru? Will the air-thru then not be as adjustable as the standard?

Either way put me down for a V-1 no air-thru!

the way they are designed...they all have the same pocket milling, the V-3 is the only one that does not have enough meat to run a air line thru

[Shirow]

the way they are designed...they all have the same pocket milling, the V-3 is the only one that does not have enough meat to run a air line thru

Where do you expect the output towards the valve to be? I don't see a hole on the diagram. Usual spot of the right hand side?

If we don't opt for gas through, will the hole be filled with a set screw or do you have some other plan?

[Ando]

You think we can get a LPR hidden in the Version 1 or 2?

[Ratt]

I have a Noxious rail, and I would love to have one of these grips. I would also like to have a Mangus frame, but those are a bit out of my reach as far as price goes. Is it safe to assume that these grips will be compatible with an Intelliframe?

[Shirow]

I have a Noxious rail, and I would love to have one of these grips. I would also like to have a Mangus frame, but those are a bit out of my reach as far as price goes. Is it safe to assume that these grips will be compatible with an Intelliframe?

I can't see why they wouldn't be - the grip takes up the same amount of space.

[Ratt]

I thought the same thing, but it never hurts to make sure.

[Shirow]

I thought the same thing, but it never hurts to make sure.

I think the only possible issue will be mounting to an AM/MM rail - the mounting piece looks pretty big, but it's hard to judge from a rendering.

My guess is on an RT rail, it'll fit no matter what, although I don't know how much placement will be able to be changed in comparison to a regular vert ASA

[Mongoose]

yes these are compatible with just about all AGD parts.

Ando: im not sure how much room we are gonna have to try to place a lpr.
i can make a new design of the EPG after these are done.

Shirow: im gonna make some with and some without the gas thru...so if you dont want one you will have nothing to plug.
Yes, it will be in the standard general area...i can port the left side and front on request "Deposit will be needed"

[Shirow]

Shirow: im gonna make some with and some without the gas thru...so if you dont want one you will have nothing to plug.
Yes, it will be in the standard general area...i can port the left side and front on request "Deposit will be needed"

Cool stuff, good to know! Now I just have to decide if I want to do a gas through or not

Pretty hyped for these personally, I always thought the standard ASA/foregrip style was the ugliest part of most mags (mine included)

Hope they can get churned out quickly

[Stayhuge]

i can port the left side and front on request "Deposit will be needed"

Awesome. Deposit will be made as soon as the price is revealed. THanks

[Zone Drifter]

I'll certainly reserve a V-1 for sure. That V-2 Fits perfectly with the other rails too i see, concerning the front edges. Like, I noticed the Noxious rail is a bit more curved, to E-mag rail specs but the others have a bit sharper edge. That's cool though, and I'm debating if I should get another rail/body setup to use with that V-2 grip. Oh well, gotta wait for the new job paychecks to kick in first.

[Shirow]

I'm interested to see a photograph once you have a prototype in hand

[Wrathbringer]

You're not the only one Shirow

That picture zondo put up also reminded me of something, have these designs been lengthened since we last saw them? I remember that was raised as a concern when these first popped up a few months ago and I'm curious to see if they were lengthened.