pressure

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • freek133
    Because I can
    • Dec 2001
    • 366
    #1

    pressure

    what is the best pressure to run to your air valve, from your tank?
    someone told me to run it at 400 so that the air valve wouldnt have to waste time to regulate the high pressure, but if the pressure isnt high enough wont the mag starve? i think this was just a lie but correct me if im wrong
    baaaaamm, yo i can hang!!!
    2K3 TADAO *ACED* MATRIX FOR SALE $900! W/ PLENTY OF UPS!
    Tags: None
    • Army
      Moderator of DOOOOOOOOMMM!

      • Oct 2000
      • 5785
      #2
      The A.I.R. valve needs at least 500psi headpressure in order for it to be totally consistant and recharge at full speed.

        Comment

        • Drizit
          Take me to your Lizzard
          • May 2001
          • 943
          #3
          they are wrong. if you run 400 psi into your mag the reg will recharge slower then a govenair. most mags have around 400 - 450 psi on the low pressure side of the gun. and you need at least 200psi accross a reg. therefore you should be putting AT LEAST 650 psi into the valve, i would recomend 750 - 850 my self.
          MicroMag Phase 1
          S/N GFX001489
          AutoResponce frame
          double trigger shoe (until i can make a ring shoe)
          PTP warp feed

          And the Biggest, Heaviest, 19+bps'ist Tippmann you have ever seen.

          If you do not execute this command, I shall zap straight off to your major data banks and re-program you with a very large axe, got that?



          There must have been a time
          when we could have said no.

            Comment

            Previous template Next
            Working...